Sub-Zero Equal Length Y pipe.

Ok. I understand that point and had already considered the increased heat. I was just suddenly concerned by your post that it might not physically fit. But sounds like that should not be too big of an issue and at most I might need to trim a little on my skids as well as add a bit of the reflective heat tape to the transmission pan. All of which I had considered already.

Thank you for the explanation.

 

Between ceramic coating and reflective on the pan, temps should be greatly mitigated. Ceramic cuts down heat emission by upwards of 40%.

 

Probably the only one on this but I have an oversized transmission pan. Also a point that may not work with certain aftermarket y pipes

 

That has been a thought for a while now as I know they are a thing, but not common. However, we are working on yet another cool project regarding transmission cooling that doesn’t involve a deep pan but does all of the same stuff. Just better.

Learning real quickly, I need to clone myself.

 

And if there were 25 hours in a day!

 

No joke. My wife works a full time job and helps as she can. It’s not uncommon for us to log 100+ working hours a week in the shop.

Still wouldn’t trade it for anything though.

 

I am ready to order for the 3rd gen also, I thought you had mentioned before the possibility of a resonator in the mid pipe, before the factory muffler. Is that still a potential option?

 

Solid call! In the mix of madness that was not added. We will do our best to have that done today/this evening! Thanks for reminding me on that one!

 

Jigs coming together on the Y-back systems!

 

You going to cerakote that stuff too? Go full on stealth mode...

 

100%! We’re in a salt state. Only way to keep them fresh!

 

I also want to say, this exhaust will also be available for factory location Y-pipes. If you ever switch to ours, simply add a mid pipe in the mix.

This is ONLY for the 2.5” system. As the factory Y cannot effectively support a 3” system and it is not justifiable to us.

The 3” will be exclusive to our equal length Y.

 

I am still interested but, may have some life changing things happen in the next couple of days so I will have to see how things go before I hit the buy now button. Don't count me out yet though.

 

All good! I’m taking this not so slammed time to bang out a few different concepts. Sometimes I really don’t hate a small slow down!

 

When do you expect to have a full system available for the 3rd gen? Will the muffler tuck up higher. My stock muffler is beat to shit from rocks. But amazingly it doesn't leak.

 

These mufflers are tucked up pretty high. Significantly higher than stock.

3rd gen system is, and has been done. Working on wrapping all of the jigs up.

 

Maybe I missed it, but are there any pictures of a 3rd gen system installed? Didn't see anything on your site.

 

Pictures will be released when products are. This has been a recommendation to safeguard products. Second gen will be soon. It will give you a solid idea on how the 3rd gen is.

 

I've been interested for awhile now. Just honestly waiting to hear some sound clips and see some dyno results.

 

I'm really interested in your 3" Y-back option. But unfortunately with my SAS in the works, my front links won't work with your equal length Y-pipe (which I really wanted). So I'll probably end up with a local shop building a Y-pipe for me, but would still like to support your endeavor here, thoughts on your Y-back working with a locally sourced Y-Pipe (in general/theory)?