1st Gen Taco Frame Box Plates

I'll be posting a 10% off code for TW members soon, I'll add it to the 1st post.

 

That's one of the reasons we went with the dimple dies!

 

Nice! subbed.
Do you have any installed pictures? How far (length) of frame do these cover?

 

No install pics at the moment. I'll add some when I get my Taco in the shop. They cover from where the frame becomes C-chanel to the very back.

 

Wondering if I should powder coat first, then touch up the edges with spray paint after the welding...

 

I was just going to paint them entirely and tape that front edge. Then afterward use some of the Eastwood internal frame coating on that cavity back there.

 

Yes. Definitely get your coating on prior, so it’s just a matter of touch up after it is welded in. Then a good cavity wax in the frame, and you are set.

 

expensivo... better than fluid film?

 

Wouldn't be a bad idea! You might bubble off some of the coating when you weld it but it will definitely help, especially on the inside of the frame.

 

Discount code is live! User "TWFramePlates" (without quotes) at checkout for a little discount!

I also picked up the last little pieces today so orders will be shipping out real soon!

 

Longer lasting although with these plates it's probably less important just because you can get at it easily. I spent a good amount of time fixing the boxed section of my frame up front and the Eastwood is excellent at creeping and sealing.

 

Bought a set- I’ll have the bed off soon, got my 63 Chevy springs and Ruff Stuff kit ready to go!

I also treated myself- I’ve got a body swap I’ll be doing, After doing a frame swap at my friend’s garage with one, 100% worth it. I know guys have changed cabs with just a bunch of people helping lift, but I really don’t see how

 

15% off sale on the entire store!
https://kpoffroad.com/​

​

 

Black Friday Sale is live!
Up to 25% off!
https://KPOffroad.com/
​

 

Figured I'd come in here an bump this thread, the frame plates are a nice addition and install pretty easily, fit is really close.

 

Ugh, I really need to do that at some point soon... Also gotta remove and replace the hack job shock relocation I did as an 18 year old and get some new shocks actually setup for the Deavers...

 

I believe there's a reason for shocks to be in V pattern; not sure if having them in parallel without anything additional is a good idea.

 

I believe it's supposed to help with axle wrap but I mounted mine parallel along with countless others and haven't had any issues.

 

Looking good!

 

I did mine in a V pattern- it lets you fit longer shocks, but supposedly compromises stability. When I do it again, they will not be in a V pattern.