New England B.S. Thread

Did anyone know that BAMF makes carbon steel cookware too?

https://www.bayareametalfab.com/Carbon-steel-cookware-_c_46.html

 

@CTSpruceMica (I feel like I've tagged you a lot today). You asked about the bridge was going?

https://turnto10.com/news/local/was...ocial-media-video-raises-questions-feb-3-2025

 

they need to make the griddle double as a skid plate for a space saving feature.

 

I might do the 7 day sub, just will wait till we get going. I have about 8 days planned for 66, but know that's not a lot for it. We might turn off as we get closer to Utah, we might have a few more days to add depending on school snow days. Basically, we just don't want to drive the same way we did when we went cross country in lastime.

 

Aw c'mon, you don't want to spend days on I40 looking at cornfields, and some more cornfields, oh hey another cornfield, oh hey some windmills!....more windmills.....Oh hey back to cornfields.

At least I10 you get the stink of oil fields for a while to interrupt the monotony

 

Swingout skidplate to cook breakfast. Im in

 

Any battery recs? Saw a bit of corrosion n it’s been about 80k miles so seems due

 

Anyone have issues with their steering shaft binding? The FJ has 4 hard spots while turning the wheel. I’ll get around to ordering parts, but for now it makes turning while driving interesting

 

I’ve installed so many Fisher plows that I can have the front end of an alumaduty torn off in probably 10 minutes lmao

 

I helped a friend replace it on his gx470. Wasnt too bad to do and the little ujoint would barely move one way

 

Alot of us have the x2 power agm and I dont think anyone has had any premature failures.

Can get it at batteries plus locally

 

https://forum.ironbutt.org/index.php?threads/route-66.3573/

 

I have the X2 27F AGM (Get the one with the terminals on the top, they tried to give me the one with them on the side at first, the cables didn't fit).

I use mine to run the fridge though (as does @TacoTuesday603), so without that, I probably wouldn't have cared much, I think my factory was a 24F, and I probably would replace it with the same if it weren't for the fridge.

 

you know they say the faster you go the easier the wheel turns..
you drive too slow...

 

Yes. I sprayed fluid film on the u joint on the steering shaft and it freed it up

 

It’s weird, it comes and goes! I’ll try some Kroil or something

 

You should see trying to parallel park it. It’s almost as bad as when I had to cut the belt and drive with no power steering when my alternator seized last year

 

The one outside the cabin, correct? I know there’s one in the footwell too

 

Yep going off memory it connects directly to the input of the rack.

If your inside one is siezed up you have bigger problems

 

I’m hoping it’s not, but the truck is an 07 with 244k on it