What Have You Done To Your 2nd Gen Tacoma Today?

Got the tracking for the supercharger finally!

 

Doing some maintenance on the wip. Does this grease on the carrier bearing a sign that it’s going bad and it needs to be replaced? There not much play on it. One side looks better than the other. Hopefully not they are almost $300

 

Front pads and rotors because a grinding started and got bad real quick.
Was making good time and feeling good until a piston wouldn't budge. Luckily the local parts stores have refurbished calipers for cheap. Then the hardline to the caliper broke. Lucky they had some short, pre-made in stock as well. Ruined the evening, but it got done. Side note, couldn't for the life of me stop the brake fluid drip. Any suggestions on a temporary plug method?

 

I just always pinch the soft line with a pair of vise grips. Have driven home that way before.

 

looks like an upgraded bearing, mine was/is black, but I've a spicer unit, well the Toyota marked one anyway. maybe others aren't black

 

speaker upgrade and a little sound deading project.

 

Congrats! You installing the kit yourself? OT Tuning?

 

Have a friend that will help me with the install, he installed one on his XRunner. Most likely will go with the HPTuner.

 

Finally got my Auxbeam mounted. Ran the control wire and the ACC wire into the cab.

 

been thinking about doing the same in my Tacoma! at least the roof, floors and back wall. and then get into the doors a bit.

 

I did my entire floor and the back cab wall but have heard the most notable improvement is when the roof is done. Not looking forward to pulling the headliner, though.

 

I cut the tip off an old rubber glove and ziptie that on sometimes. Pinching the softline sketches me out but should be fine tons of people do it.

 

yeah, hopefully ill be able to park the Tacoma while I do it, and drive the back up beater.

 

All done

 

Awesome man
I installed mine this past November and it's been a blast with the extra power. Everything is just better. Towing, passing, etc. I'm sure there won't be any disappointment.

 

Doing the smaller pulley as well, URD headers and I’m on the fence with the methanol kit.

 

Finally got around to installing my spiker hood struts. Also, going to pick up a fj tcase on Monday.

 

Installed a TRD Short Shifter. Amazing improvement.

 

Finally installed the DD SS3 Pro fogs (Black Friday purchase). Had a tough time aiming them and will need to give it another try this week. Anytime fog light mod up next after that.

 

Which pro grille is that? I’ve been looking for one and don’t really want to drop $400 on the OEM one. Would try one of the EBay ones if someone had one they vouched for.