What Have You Done To Your 2nd Gen Tacoma Today?

I still have to get the grease they recommend along with a grease gun.

$9 Mobil 1 Mobil - 121928 121929 Xhp 222 Grease, 13.7 oz.

https://www.amazon.com/Mobil-121929...616-af48-7cc4d18ad968&pd_rd_i=B07B7XQVTZ&th=1

$29 LUMAX LX-1152 Black Heavy Duty Deluxe Pistol Grease Gun with 18" Flex Hose, Handy 3-Way Loading - Fill with Standard Cartridge, Suction or Bulk Fill. Convenient One-Hand Operation for Easy Greasing.

https://www.amazon.com/Lumax-LX-115..._csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM=

 

Apologize for the late reply. It’s these lights:

 

which tail gate cover is that?

 

https://snailarmor.com/products/snailarmor-tacoma-tailgate-2nd-gen

 

Custom PRP seats installed. Now onto the b-pillar portion of the roll cage now that have the seats to contour it around

 

Added light bars to replace the void that was left after thieves stole my old one.

 

Installed FJ intake tube and new MAF. Time for an OTT tune

 

I have a similar bumper. Could you link me to the switch panel that you ordered?

 

https://auxbeam.com/collections/switch-panel-4-circuits-4-gang
Here you go, man. They have 6 and 8 switch panels as well.

 

I'm doing the same exact thing for the same reasons. I already rebuilt my TC arms and they're clunking again. The JBA's just arrived and need to install them.

 

Well it’s official boys and girls!

 

I rebuilt my bed stiffeners out of SS. I must have redone (grinded, cleaned, painted) my original TC bed stiffeners 3 times due to rusting. I need to touch up some areas still.





Rusted parts of original TC bed stiffeners





I utilized the same holes and hardware as the TC stiffeners. Also beefed up the supports.
I do a lot of saltwater activities, so my situation may be a special case of rusting.
Still learning to weld better.

 

I'm close to pulling the trigger on the same. Might I ask who you ordered from?

 

URD.

Along with their URD headers, smaller pulley, fuel pump/filter and cam gears.

 

I live in New England. The elements aren't nice to uni-balls.

 

Very cool. Which CAI box did you go with?

 

Have the Volant, hopefully the S/C isn’t starving for air cause of the snorkel. I THINK it’ll be fine since it will have air coming from the front as well. URD Headers should be nicely paired with my URD SPEC-U exhaust.

 

Had to go out and see it out of the bag lol!

 

Gave the taco a wash just in time for the storm to hit SoCal again.

 

Also, does anyone know of a good solution to fixing the paint issue… my Roof is bad and it’s starting to get my hood too.

Tried searching for a paint thread but was unsuccessful:-(