2010 Tacoma, Windshield wipers dont work and fuses are not broken

Just the other day my wipers quit working. Both the 10a and 30a fuses in the cab are fine. Is there any simple solution to fix this? I know there are relays under the hood in that fuse box that might be fixable? but cannot find any diagram that explains which one is which. Anyone have experience with this???

 

Does the horn work? (not that that means anything)

 

There are no relays for the wipers, the motor gets ignition Power from the WIP Fuse (30A) on Pin 2 (Blue) and constant Ground on Pin 5 (White/Black). It has high and low speed inputs from the switch and a park position feedback to the switch.

 

Did you check the fuses with a meter, a test lamp or just visual?

Visual is no good. Get a meter or a test lamp.

Do you hear anything when you turn on the wipers. There could be an issue where the motor is running but the drive linkage has failed.

 

Thanks yall, no sound from a motor. I’ll take it by the shop to get a tester on it tomorrow as all my checks were just visual……

 

Update please when you get new information.

 

Tried new fuses, they didnt work. Taking it in to get diagnosed over the weekend and will report back what is found. Thanks for everyone's inputs