About to hit 200,000 miles on my 2010 V6 Tacoma, seeking advice

Check your ball joints and u-joints.

 

I’ve got a 2015 DCSB 4x4 TRD. The very best thing I’ve done to it was around 170k miles I did complete strut/spring on front and shocks in back. Got a good alignment and it drove like a new one.
I’ll not repeat the other maintenance items I’ve seen above which are all great ideas.

 

I second this. I’m in the process of updating my suspension with OEM parts on my ‘08 with 195k miles. It’s easy to overlook how much of a difference fresh suspension components can make. I thought my truck felt pretty decent for its age, but after replacing the rear leaf springs, shocks, and front struts, it’s like driving a brand-new truck!

 

I use a wire wheel/ brush and fluid film or surface shield warning its messy smelly stuff

 

I just did a transmission flush about a month ago!

It was the first one I had ever done in years, so it's had 2 at this point but I'm going to do them more frequently now.

 

Thank you!!!

 

I probably need to do that. I have an Old Man Emu suspension with aftermarket UCAs, all of it was installed around 2012 so it could probably use new everything.

 

Looks like most things have been covered.

Check/replace the suspension bushings when doing other suspension work.

 

Will do! This to-do list is stacking up!

I appreciate all the feedback.

I'm at a point in life where I can once again afford to do more to my truck, maintenance wise, I mean.