Shop Time w/T.W. Friends

But if you put a window in there, where will he go to hideout and take a nap?

 

Are you okay? I heard overly stretched might cause ache and pain.

 

I thought about adding a window but don't really want one.

 

its not a drivethru

 

No nuggets??

 

This was an entertaining one to draw up.

 

Must not have had flies back then.

 

Sounds like childrens book

 

New circuitry design for the car? My brain hurt just by looking at it

 

He then have to put in some window screens

 

Now we are talking more my style.

I love the two separate sets of 12v batteries to supply 24V power to each device.

I remember the first time I walked into an electric room with an industrial 120v UPS and seeing 120 1v batteries racked against the wall. Crazy

 

Fortunately i don't need to understand what I'm drawing, I just need to be good at following directions and reading scribbles.

 

I’d just use that pipe instead of studs. Adjusts the atmosphere just right. Get Folks to mail you files. Not paper….the Machinist kind.

Cheaper that way. Only gotta buy one meal & nobody argues.

 

I wish we could trade roles right now. I’ve got about 300 drawings that I need to closely review and understand.

 

^ sounds like our engineering dept, understaffed, under supported and underpaid. NASA expects our engineering to support launches off-shift sitting on console then rotate back to regular shift with less than 12 hours turn around. No thanks to that.

 

Yesterday I mounted the "new" tool room heater close to the ceiling, there is about 6'5" under it so no head banging.

I did have to fork out some $$$, with all the junk valuable parts in the archives I didn't have a 30 amp receptacle or face plate.

So now I'm into this project for almost 20 bucks...

Today was test run day.
The room started out at 40 degrees, in less than an hour it was up to 70, still cold as everything in the room started out at 40 degrees too.

Overall a fun, useful and best of all cheap project.

 

you really run cabinet tamper switches?

that's always the first thing that gets removed...

 

I started off copying the stock diagrams them I'm editing them for what we actually want.

Examples - The original has three batteries, we want four and they wanted the gutter and conduit added. In a future iteration, the tamper switch might very well get nixed.