Shop Time w/T.W. Friends

I used the pipe threader more in the last two days than I will in the next two years

 

Shop cat has the same idea, except she’s on the blower side of the stove. She’s 16 and lives in this chair, or under the stove.

 

! There are always mavericks in the herd.

 

This will be as for as I get probably for at least the next Month. Got the Camaro base model meshed. Unfortunately, my design software is not very good at freeform mesh modeling. I will have to use a different software to design the widebody fenders.

 

And that's why I'm always wearing my safety contacts.

 

I sleep in mine.

 

Good morning everyone, I hope you have a pleasant Sunday

 

Morning all

Supposed to be a nice warmup here, debating if I should risk it and put the snow blower back in the shed. Would be really nice to get it out of the garage so I could start on my project... Guess I could, wouldn't take much to pull it back out. We've had some March snows, but not recently.

 

murphies law says you'll be kicking yourself either way.

once the snow blower is dug out, i leave it dug out until at least april. pain to work around, but it also keeps the snow away!

 

sickening discovery this morning. JB weld is my best friend today

 

Do it!

 

Oops! @six5crèéd is your shop opened? We have potential customer

 

She’s 16, she knows what she is doing.

 

Or an actual welder… hit up a muffler shop (bring refill fluid, they gonna drain cause fires aren’t fun).

 

Did JB weld for now, taking it to the shop on the 25th anyways to get some other work done anyways so very convenient timing.

 

@six5crèéd now it's your move to finish your walls before mine!

 

What exactly happened there?

I hope that damage came from the outside.

 

Bolt cam out of the ring gear maybe?

They make new covers for those rear ends, but they got to be welded on by a pretty good welder.

Either way

 

I have no clue. Noticed it was leaking oil when I pulled into my driveway one day, didn’t hit anything, but I do vaguely remember feeling a giant thud. I patched the hole up and refilled the fluid and it still drives, so I’m hoping for the best..

 

Figured I should start a build page for the GX.

https://www.tacomaworld.com/threads/phillstills-daily-driver-long-travel-gx470.853231/