NLC - HUGE 4TH OF JULY SALE - USE "J15NLC" FOR 15% OFF

It can, but there are little grip points on the roof (most just use the original double stick). If it can be used… HMU.

 

I have an extra set that would also need to be cut. If you wreck the first set hit me up.
3M double sided tape as mentioned.

 

Awesome! Is it from a 3rd gen? I think it's slightly different from the 2nd gen pieces.

 

Hell ya, I appreciate you guys. I wonder if I can get away with cropping a portion of the middle section out. It's seems theres important rubber edges on both sides ya? I'll have to look at mine.

 

Aw crap… too many variables… yep 3G DC TRD LB 4WD R E S P E C T wakawakawaka…

 

All good my friend! I appreciate you looking out.

 

The back is part of the downturn piece. Memory says front is integral, but rest is same. Back piece slips inside. Not home for a few days, otherwise I’d take pics.

 

I can look at mine and get pics tomorrow but I like the cutting out the middle idea. It will look best. Slick them together with a dab of rtv

 

Thank you. No rush

 

Shouldn’t have to if the tail is the same from the front all the way to the end. The curve for the back of the cab is separate and has the part that fits the clip.

 

Looks like the back piece goes in the clip and the tail is just cut with a notch to hold the tail

 

This is great info. I could get away with just the two long pieces and give them a little snip and a notch hole and use the original OEM strip as a stencil. I can't see the 3rd gen set up differing from the 2nd gen version. I'll have to pull mine up and compare. Thanks for that visual!

 

So, you gonna leave me with the extra ends?

 

Haha no. Just brain storming. My back pieces are in good condition.

 

And these aren’t?

 

www.nickleecreations.com​

 

White, Black, Red and White/Red replenished! Get them while you can!