What Have You Done To Your 4th Gen Today?

Looks awesome. I was thinking about mounting my spare in the bed but I was worried about my tonneau cover not covering it. It appears that it would work. Was it a pain to mount? What size is your spare? Thanks

 

It was super easy to mount. I marked where I wanted it and drilled holes for some m8 press nuts. Now I can remove the whole rack within minutes if I need to use the bed. The spare is a 35x11.5 and it stays well below the rails so any tonneau would still work with it. I’m super happy with the results and I was able to remove the spare from underneath giving me tons more ground clearance in the rear. Along with my AFE exhaust there’s now nothing under the back to get caught while off-roading.

 

I appreciate the feed back. I will look into this. I have a swing out box that I have to contend with.

 

Same happened to me. Noticed no flash one day and then I checked both lights and neither were flashing yellow. The solid white was fine. Got a replacement set from Lasfit and they told me that they have not seen any problems and questioned me when I said I had no fast flashing indicator when I turned on my directionals. Does not seem like they are telling the truth since this is the 4th set on here that I know failed. When I went to put the replacements in, LED's fell off. Looks like whoever is doing the surface mounting of the LED's on the boards is doing a poor job. Anyone who has these should keep a close eye on them and check them quite often.

 

I have a 33 stuffed under the bed...low hanging fruit ...and I have all but flattened my tail pipe...who engineered that marvel?
I have the SXTH element muffler dump now. I really don't want to suck up all the room in my box. I also need my tonneau cover..I was looking for a hitch mount swing out ...but 2k? Ridiculous.

 

In the same boat...will find out this Saturday if the spare is sitting too low. I do like the looks of the bed mounted spare though

 

Next mod acquired…

 

nice…been thinking about those as well. Where did you find them?

 

These guys have a shop in Duncanville. They have multiple sets at reasonable prices.

They have listings in Facebook marketplace under And Address is as follows:

1126 S Cedar Ridge Dr, Duncanville, TX 75137

Telephone - 469-412-3455

Here’s are listing examples -

 

All they asked from me was to verify make and model. They must be having significant problems?

 

Yes yours is a sport that come with 18's but the picture I was talking about was an offroad and they should be 17's... Maybe I was looking at something wrong

 

Oh wow. Didnt know that the sport and offroads had different rim sizes. Thank you!

 

Plugged .

 

Mine is off-road and came with 18s.

 

We did a bed cover this weekend

 

Just did the same thing!

I just swapped out the dash speakers, again. Originally went with DS18 Pro speakers. They are just too loud and over-powering. They drown out door speakers completely.
I changed to some Polk DB+ 4” speakers. HUGE difference:

These sound great and are better balanced compared to the others. I can actually hear the door speakers again.

 

Is it a hybrid? I just looked it up I didn't know that the hybrid offroad came with 18's

 

yes it is.

 

Are these speakers plug and play? Are you running the Beat-Sonic System?