For Sale: 4x4 Manual Hubs, Spindles, Knuckles and CVs

I will check with SKF, they have tons of seals. I’m sure there is something out there.

 

Set or ADD CVs going out…

 

@TacoDell60 on the way…don’t worry, they are primed and painted as well.

I’m totally crushing some tacos tonight.

 

@Majestic Tacoma, getting busy down in Florida…

 

heck yes!!!!!!

 

I don’t need anything from you right now but every time I see your work I wanna buy something

 

Hi, my RH Steering knuckle is bent, I need to replace it, its a 2003 4x4 with ABS.
Can I get a quote please?

 

PM Sent.

 

I just wanted to come on here and say Jason is awesome to work with. Great communication and solid craftsmanship. I can't recommend him more. Thanks Jason!

 

Another set headed out for Texas!!

 

do you still have some 4wd front hubs?

 

For anyone wondering if the RC Fab gusseted spindles work with stock 3rd gen Tacoma SR5 7in wide alloy wheels (+24 offset I believe)...they do not:

 

@TacoDell60

1. Is this the same side that you had the bent knuckle on? If so, are your alignment tabs flattened?
2. Is this picture on the lift or on the ground?
3. Has the vehicle been aligned or checked with this? What is the camber on this wheel?

These gussets were designed around the stock wheel and no spacers. This is by far not the first 3rd gen installed with these on stock rims.

I’m here if you want to reach out and sort through this. I also provided my phone number for you text or call.