What Have You Done To Your 4th Gen Today?

I am using the Beat Sonic amp. The speakers - any speakers - require pigtails or wire harness, however you want to say it. I bought mine from taco tunes. You can also buy metra kits (check crutchfield for part numbers).
Think it was $10 or such.

 

Installed the Bonobo front and rear recovery hooks.

 

KO3’s installed on my Tundra Pro wheels this morning.

 

Installed Vantrue dashcam. Super tiny 1”x1”x1” solid little unit

 

more pics of those tundra pro wheels! how much different is the offset from stock?

 

I’ll detail the wheels, get the truck washed, etc. then take some photos with my good camera.

The Tundra BBS 18” wheels are +47 offset so they tuck in the fender wells almost identical to the stock OR 17” wheels with the 265/70/18 KO3’s. No poke!

I also took a bunch of rear brake line photos while the wheels were off.

 

How easy does this install? Would you have a link to the install process?

 

Those are some great looking wheels, but dang are they pricey!

 

Super easy if you have an auto dimming rear view mirror. Just need the dongle

$43 Dongar Dashcam Power Adapter (10-pin Type B). Compatible with Select Toyota, Lexus, Subaru Models. Connects to Rearview Mirror, Built-in USB Power Source, Easy to Install

https://www.amazon.com/dp/B07BH4G1NW?ref=ppx_pop_mob_ap_share


https://youtu.be/LWjoxmtVH70?si=vrEZS2rqCziYyycA

 

These are 265/70/18 KO3 & no lift on the truck? Wondering if I can go any bigger with stock suspension and not rub.
2025 sport came with 18s so this looks like a nice option.

 

You can definitely go bigger. Lots of room.

Stock suspension for now.

 

It seems everything I like is expensive. Bought those wheels used for $1500 but they are in good condition.

New they are crazy expensive.

 

The color looks great love it.

 

Mountain Hatch tailgate upgrade!

 

Trekpak center console DIY

 

Their product page says it is a direct replacement, not an overlay. Is that true? Also, how much flex is in the material?

 

Rotopax rail mount from Rago Fabrication!

 

That is nice and clean. Might do something like that for recovery boards.

 

Not the OP but I had one and didn't like it. They were a replacement for the previous gens, not so with the 4G. They lay right on top of the factory tailgate panel. It is a much cleaner look on the third gens. Not a lot of thought went into the design for these new ones, imo. And they're a piece of shit company, lying to me twice about my panel being shipped when it clearly wasn't. As far as them flexing, they are plastic so of course they have some bend. Not really sure that's much of a concern with them being screwed to the tailgate, though.

 

Yeah i'm really pleased with how it turned out because I just wanted something simple. Molle panels for me felt a bit overkill right now. The pair that come with the order make for plenty of different setups. Highly recommend!