2nd Gen DIY Big Brake KIt -OEM parts- Part #'s provided (INSTALLED)

Took advantage of the Southeast Toyota 25% off parts sale and ordered everything for a 13WH upgrade, now I guess I need bigger wheels

 

Does anyone happen to know the part # for the 2nd gen (2009) 4.0 PCV and CCV valves? Thanks.

 

You’d have better luck in an engine related thread, or by posting a new thread.

 

Sorry, was looking at a thread for the pcv just before I noticed alerts and this is where that led me...

 

what are people going with for NAPA in place of Eclipse SE3318/SE3317? Adaptive One or Nugeon? and whats the difference? both show as interchange to the old Eclipse's and the Nugeon's are $2 cheaper than Adaptive one?

 

I have a pair of DBA Slotted rotors for sale if anyone is interested in buying them. 200 plus shipping. These rotors fit this setup:
13WL calipers match 319mm OD (12.559-inch dia) and 28mm thick rotors and accept the 231mm pads (this is from 2000-2006 TUNDRA and 2003-2007 Sequoia and 2003-2005 and select 2003-2005 4runner)

 

I have been following this thread from OP #1 and still have this question (sorry if I missed the answer along the way)...
If the 13WL calipers can accommodate the 13.3" rotors, then why not just go with them instead of the 13WH calipers?
One reason to do so is the ability to just modify, instead of replace the dust covers. Thanks!

 

Hello... anybody out there ?