Colorado Trading Post

ahhh fair enough, was hoping you had the wafer set for it already. I will have to give it a go, I think i remember the basics from what you showed me about the household cylinders

https://www.clksupplies.com/collect...its/products/toyota-tr47-pinning-kit-a-30-108

 

I have an XR and an 11 both 64GB.

 

A few of the items from my 2005 Tacoma are off.

Rear 8.4” Axle with 5.29 gears and an factory E-Locker with a rear disk conversion SOS BBK (e-brake included). Plus front Diff 5.29’s and locked. Keeping them together. $2,750
Tundra Rack and upgraded tie-rods. (Will have to get the mounting hardware for the spindle). $1400
OEM Calipers w/rotors. Make an offer
6” RC Lift with remote reservoirs F&R, w/RC UCA. Also gusseted spindles. Make an offer
40" Mickey Thompson Baja Pro XS's (under 1k miles) with 17x9 -12et TIS, 563BZ wheels (will get them unmounted soon if they don't sell together). $2500
Bora 2.5" wheel spacers $250

 

@ShiftyShank needs these.

 

ISO: 5" oval tube steps for 2018 Access Cab if anyone has any laying around. (PT767-35111)

 

Pm sent

 

Anyone have one of these 2.5 gen lower front bumper pieces in great visual condition they are going to toss?
Somehow mine got scuffed up makes the truck look bad when the rest is in excellent condition (other than some pinstripes from trails).

 

https://www.rockauto.com/en/moreinfo.php?pk=4284291&cc=3307209&pt=1384&jsn=769&optionchoice=0-0-0-1

 

I want free “trash” the one I have is fine, but bugs me that it has some mall rash.

 

get a hidden winch bumper!

 

then it gets heavier, he can't do That.

 

Sold

 

I’ve seen a a few online FB marketplace. Here’s one (not mine):

 

If only Boulder County was in your territory. I have new dead bolts that need to be keyed to my existing house key.

 

Let me check with my buddy. One of his buddies just put on a new aftermarket bumper for his 2nd gen.

 

I bet Mcguckins would help you out if you take your new locks and existing key there.

 

I absolutely do not do residential. I am a commercial door whore only.
So many times a customer calls saying that exact thing, not realizing the pretty finish they chose is incompatible with the actual keyway on the existing hardware.
I have had over a dozen calls this year alone for this, I recommend Google for residential, or take it to Home Depot and they will sell you what you need. Residential locks are far from rocket science or needing any more knowledge than how to use a screwdriver. Stay away from the POS handle sets and the fancy thumb activated shit as it will fail in under a year. Residential hardware is usually cheap pot metal with a shiny finish and requires regular lubrication that they never get, so it wears out fast, even though it only gets used a half dozen times a day.
I myself have the old school Kwikset trash on my doors, lubed once a month or so, for over 30 years. Expensive locks will gain you no extra security on a house as the frame is literally designed to be kicked in.
I keep a bat by the door for those occasions.

 

Ever since they went full Ace Hardware, I don’t go in there anymore.