FEND-X Tacoma Wheel Liners

It was really hard for me to visualize the sizing for everything until I had oem ripped out and was up in there with the full size ones. There’s like a cavity waaaay up in the front wells and that’s where the trimmed ones fit.
I’ll see if I can find a post I made with pics of trimmed liners installed.
Idk about the rears though

 

Selling my brand new liners for $280. Comes with all mounting hardware. Intended for a 3rd gen with fiberglass fenders but can easily be trimmed for stock/cut.
Located in lake Tahoe but will ship.

 

Any 2nd Gen owners with trimmed fenders have some photos, tips, advice before I tackle this.. haha

 

The sun is not enough. Have a heat gun handy.

 

Discount code? $94 dollars shipping to Washington seems excessive for front and rear set?

 

Finally installed, PITA and had two friends help me. Great product and easy as hell to mold and work with when it’s warm out. Hit me up for install advice

 

What’s up with the fitment? Looks like it needs to be trimmed to fit inside the liners. I ordered mine precut to fit trimmed fender flares…not happy with how it came out..

 

how did the install end up going? Mine were a PITA and took three sets of hands to stuff them in but once in they are perfect

 

I still got these if anyone wants them. Shoot me an offer

 

bro…rough install…lots of heat, redrilled some holes, and trimmed about and inch-inch 1/2 to make it work.

 

Hey @cnote4l -- I have a set of your splash guards from maybe 5 years ago that have ripped out all their mounting holes and are starting to flop around.

No shame on your product -- the fact is, I added some spacer washers under my front cab and radiator mounts, so I could fit water lines between the cab and the cab mounts at the back of the wheel wells. (For anyone wondering: I have a hot water system for camp showers, with a 12gal tank over the muffler, a pump in the bedside, and a heat exchanger in the engine bay.) So the splash guards have been overstretched for years. I'd guess I have 3/8" of "body lift" at the radiator, and ~1/4" at the front cab mounts.

Any chance you could custom-cut a new pair of wheel well liners sized for... say, 1/2" of extra fender-to-frame clearance?

 

Will 2nd gen liners fit a 3rd gen? I never installed mine but want to give them to a friend with a stock 3rd gen