Keystone State Thread

Tried to mount the bedside tool box yesterday and well i fd up the tool box. Good thing is i got the box for free now it's scrap aluminum. Alot harder trying to mount the side box than the one that goes between the two bed rails.

 

I may try to wire up my light bar today. Let's see how that goes. It should be straight forward considering i have the harness. But my experience with wire or electrical isn't that great. Now my question is should I unhook the bat or will I be fine just hooking it all up.

 

So they coop is almost done just finishing touches.



Now to fence it all off. Gotta build a walk way up to that little hole in the front.

 

Im an idiot. Have a appointment tomorrow to get my lcas done and just realized I only have the front camber bolts not the Rears. IdIOT hopefully my local toyota has the Rears in stock.

 

Fingers crossed.

 

Good morning.

 

Morning Pennsylvania

 

Hello all

 

Good morning Neighbor to the North.

 

Good morning all.

 

Good morning Pennsylvania and surrounding areas

 

No one was in the area but I bet this was exciting. Front blew off a 60horse motor.

 

Happy way after noon all

 

Anyone interested in planning something for 2025?

@king.cong.1119
@TS4x4

 

Early evenin' PA

Got the truck washed before the hart of the wind came through. I was part way through cleaning and flushing out the frame and it started picking up. Now we'll see if I run across another exploded liquid manure spreader this week again

 

While the largest motor I work with is 25hp, I can only imagine the sound that make.

I have experienced a couple 25hp VFD's blow up. Would trip the entire panel and I would have to suit up and turn each overload on one by one... You would think after the first one I'd remember to wear ear plugs. Nope

 

Our biggest VFD that I muck with is probably 30hp. The one for the blast freezer might be bigger but it's cold in there so I pretend it doesn't exist.

There's a rack of 6 size 4 starters feeding this hydraulic skid with appropriate breakers. This only took out the breaker for that motor, didn't take the panel feeder which is probably on a 400 amp.

Myself and another guy shrugged, flipped the breaker back on, closed the panel and hit the button. Nothing exploded that time, but we're pretty sure this qualifies as locked rotor amps. Kind of disappointing, if it had gone to ground we'd have shut half the plant down.

 

Here comes the dumb questions. Posted my accord on fb marketplace for 1000 firm. As a parts car. Still runs but not great listed all the new parts installed. And also said it needs to be towed.
What do I get as a question why does it need to be towed. Jesus christ what have I got myself into

 

dO yUo stILl hAVe thE CaR LisTEd?

 

Had another guy say I got 350 cash and a trailer. Congrats i also have 350 in cash.