Tractors, Mowers, Chippers, Trailers, Chainsaws, Generators, Driveway Erosion Control, ETC.

Wow u ripped the top hook off it?

So was it a cheap made?
Or you really had a load..

 

Wasn’t mine. I wouldn’t own a red tractor for starters. It looks like that QH is a Vevor. Notorious copyright thief’s strike again

 

I hope you have a quick recovery

 

Thanks guys

 

I’ll probably be in the market for a small DR type wood chipper this summer if anyone’s got a favorite under a grand or so.

 

COPY THAT.

Yes Mahindra is the largest selling brand in the world...... There's a reason for that......
Chinas population & they are only allowed to have M's.... Simple math.

They are not the best selling tractor in the US. NOT even in the top 5.

https://www.tractortransport.com/blog/

 

mine has been a great value. was the pro 410. please buy electric start. its 10x the effort of a mower to pull.

 

Full fluid change with filters this weekend.

Tonight finished engine, fuel and hydraulic system.
Front axel is draining.

tomorrow is fill front axel, flush radiator and greasing.

 

Hope for a quick bounce back. Obviously follow DR's orders and things go smooth.

I honestly have a friend that decided he could use a tiller a week after shoulder surgery and couldn't figure it out...

 

hey guys. still not confident ive found the correct carb for my tiller. so, another carb problem is my pressure washer. the replacement looks a bit different. ran fine but when shut off fuel runs out into the airfilter. there are a couple screws on top the stock carb doesnt have. could a mis-adjusted float be the issue? im stuck at theing honda dealer all day now so ill try and post a pick of both.

 

I’d say the float needs adjusting, probably not much though.

 

thanks. thought so. probably a slight turn clockwise?

 

More than likely, there is crud built up around the float needle. Needle can't seat and gas keeps flowing into the carb.

I'm guessing your washer is a gravity fuel supply tank? The tank is higher than the carb.

 

Rebuilding a Toro deck.

 

Don’t stress over the mess. I knew this was going to be a wet one. Radiator cleaned, flushed and filled.

 

the new carb is leaking the fuel yet it runs. petcock needs immediate off when not running. which brass screw adjusts the float? and to correct it which way do i turn it? heres a pic of stock compared to aftermarket carb. gravity fed, yes

 

Id guess the one pointing towards the bowl if thats what its for. Most the ones ive seen you had to adjust the float from the inside.

 

man, thanks for the idea. i really dont know. i would hope a flooding carb sould be an external adjustment as to not take everything apart per change.

 

Is there a fuel filter in the line from the tank?

Yes, you have to remove the carb to remove the bowel and float/ needle. Sorry.

 

no. but the carb kit came with a filter. didnt have enough spring clamps to use it. bowl can be removed in place. im just not sure how to know how to adjust.