KTJO POWER FOLDING MIRRORS NO POWER

Hi, everybody. HELP
I have a 23 Tacoma off-road Tr. D. And I put the ktjo power folding mirror kit on and I have absolutely no power. No fuses are blown and I actually have another kit that I was going to use on another vehicle, so I swapped out the control box, the switch, And they all are fine..... NO BLOWN FUSES, power mirror switch works adjusting mirrors What is going on
I've tried to contact KT Jo. It is completely worthless. They deserve AF for customer service.

 

Doublecheck your connections for bent pins and make sure they are seated good. Check the wires that are used for the lock/unlock circuit to be in the right pin location on connector.

 

Thank You!!!! This may help I didn't realize the harness has a fuse

 

Ok there is a fuse in the harness that was blown...But I still need your expertise...at this point when I use the fob or the switch both mirrors work out of sync...the passenger is open while the driver side is closed or vise versa...so obviously I need to unpin and switch a few wires...take a look at this diagram and my pics please my 23 seems to have slightly changed
Thank you
Ron

 

When you use unlock on fob, mirrors should go out or unfold. When using the lock, mirrors should go in or fold. Look which mirror is running backwards and check the wires for that mirror. Your wires colors look different as you stated, than mine. Mine are 4 years old. Looking at some notes I have.

 

The driver side is the one acting wrong should I just swap those 2 wires

 

You could try it, just double check the wiring

 

I still need to install mine, have had them for multiple years. Box just keeps staring at me

 

Fixed i verified it with a fused q2v line straight from battery plus ground

 

Thank you brother

 

Glad you got it going.

 

I have the KJTO Kit here also waiting to install on my 2023 Taco TRDOR. Guess I will run into the same issues... Any other good advice for installing?

 

On my 23 trd or it was completely plug n play except my kit didn't include the wiring harness for the motors so I had to make them...so in the end I had to switch the wireson the driver side
Now it works amazing

 

Did you order the complete mirror pkg or just the diy kit? Trying to figure out what harness you had to make or why (was it supposed to be part of the kit)

 

Plug in play 100% missing wiring harness motors

 

I got the diy kit so I’ll be doing the motor mounting/drilling etc. I’ll have to look at my kit to see what’s all inside and if I’m missing anything

 

Oh Well, if that's the case, then I got to do it yourself, it still should've included the harnesses. But yes, I did all the drilling, everything, all of that was a piece of cake

 

Did you ever hear back from KTJO?

I also was missing the connector for the motor. The screws to mount the motor were incorrect as well. Lastly the mirror adjustment only works on the right side and in one direction.

I guess I will have to make the connector myself. Not sure about the harness for the mirror adjustment

 

Never
I just made the harness myself. They actually give you think some pins inside the kit that you could use kinda like a spade.. Mine seems to be working fine back to figuring a few things out

 

Was your motor wiring connection completely custom, or were you able to find the proper connection somewhere? Do you have a picture of your custom connection to the motor? Both the male and female end.