New England Mod & Meetup Thread: May 17 at Jared’s!!

My orielly lifetimes had torn boots within like 20k. There's RCV and another company that make upgraded ones but they are expensive.

 

Nope, warehouse guy said probably an epoxy additive but I have no clue.

 

I found a few options last night, company that rebuild in Cali that has some options, and Detroit CVs or something like that, they rebuild factory ones.

 

Happy birthday @Roody

Hope you have a great day Ross!!!

 

Morning folks,

Another wiring question.

I got dual color lights (green and green) and they have 5 wires coming out of them. 1-ground, 1-sync, 1-mode changing, and the last 2 appear to be power for each light. Meaning each light has 2 power wires, can I just wire them together?

When I asked the company about the extra wire they sent me this.
https://onedrive.live.com/?redeem=a...23E!s97ec4182675b478190ea4e228e65b469&o=OneUp

 

Super productive weekend

Still have a dozen chickens and a really hungry husky, but she is getting better.

Shitbox #3 is running and driving, just need to do the valvecover gasket and I have an extra rubber cover I didnt have before. But all that should just take an evening. We are gunna drive it for a bit then sell it.

Tiff finished up our maple syrup while I was working on it. Got about a gallon.



Built my Tauler jack, this thing is sweet. $60 for a trailer jack and $115 for the lasercut parts kit. I think I will be able to use it as a hitch mounted vise too.




I am also going through the shop top to bottom(literally starting in the loft). Made a bench and setup that I am going to use to Zinc w/ yellow chromate plate my own parts. Also a vinegar bath to remove mill scale.

Still need my brother go get his pile of shit out. And lights/power/air.

 

@super_white
Thoughts Harry?

 

I’ll have a look at that later. The wiring diagram is hard to read on my phone.

 

Monday. What’s the first job I get? Do this because another shop or the owner couldn’t.

 

I looked at it and still confused. That picture is too blurry.

With that said, I see no problem with hooking up both wires to power the lights at the same time.

 

Ya, it’s a crap picture, but really all it shows is that there are 2 power wires, a ground, a sync and a mode switch wires

 

I have 5 wire on order,

$70 NAOEVO 14 Gauge Wire 5 Conductor Electrical Wire, 14 AWG Stranded PVC Cord, 12V Low Voltage/Tinned Copper/Flexible Cable for Automotive Wiring, Lamp Cord, Marine Cable (50FT)

https://www.amazon.com/gp/aw/d/B0D1714K97?ref=ppx_pt2_mob_b_prod_image

I figure I’ll run 5 from the lights to the engine and then see what works from there.

 

Who makes the lights?

Had another look at that diagram. Connection both wires together won't be an issue. Are they fused?

 

https://www.extremetacticaldynamics...or-linear-led-grille-and-surface-mount-light/

they will be run to an aux fuse box I am installing

 

If anyone's thinking of having any fab work done by me I am pretty well booked out to just about July. I can probably fit some smaller stuff here and there but not much.

 

Sounds like business is good.

 

Business is good, 2 jobs is bad.... Some of that time is me setting time aside for the flatbed build. Should pickup the materials next week.