WTB‼️ Toyota part # 48473-04031 FOUND THEM‼️

FOUND WHAT I NEEDED‼️ Thanks to everyone who replied…

I thought I would ask here before forking out $219 out the door from my local dealer!
I need 2 / two of the number 10 part in the link below or look at the bottom pictures.
Toyota calls the part a “Lower Spring Seat” It’s the formed piece of steel that the U-bolts drop through on a 05-15, 5 lug. The piece holds the rear leaf springs to the rear axle and the bottom of the rear shocks bolt / are attached to this piece / part / seat. It’s a part that many just disregard.
It’s a shot in the dark. Yes I have been asking wrecking / junk yards for weeks now, searched FleBay, Craigslist & Facebook Marketplace under Tacoma leaf springs 2nd Gen. and Tacoma parts.

https://toyota.oempartsonline.com/oem-parts/toyota-seat-4847304031

The reason I need them is CalTracs reuses / welds a bracket to them.
With the LS Swap in my 5 lug going to break something if I don’t come up with something to stop the wheel hop. At 45 mph in 2nd. gear if I nail the throttle the truck will just wheel hop the 275/45-19 Perelli P7’s.

 

Im taking a set off this weekend

edit it is for a 6 lug though

 

OP, I would see if the parts are the same between the two, you might be fine getting the 6 lug one. It's just the leaf spring plate, and lots of guys take them off to do the ubolt flips or like me and go SUA. Sadly mine is already long gone.

 

First Thanks guys for the replies, I very much appreciate them!!
Trust me the 6 lug part is not even close.
The 6 lug lower shock mount is welded to the differential, the 5 lug lower shock mount is part of the plate.
There are all kinds of 6 lug spring plates available 5 lug not so much…

 

OH, sorry, reading comprehension. I didn't see you said they were all in one piece. I thought you just needed the leaf spring piece not a combo leaf/shock part. TIL.

 

Why not build new ones out of heavier steel that will hold up better, they are easy to build.

 

Junkyard item.

 

If you are close to Bakersfield Ca I have the metal and a welder. I like your LS Swap, I installed a Mazda Miata running gear into my 1961 Sunbeam Alpine.

 

toyota of greenville and serra toyota in alabama have 25% and free shipping over $75 i believe

serra is a few dollars cheaper so i went with them again this time.

https://autoparts.serratoyota.com/

 

Oh My God that’s BEAUTIFUL‼️

Thank You

 

Very well done.