What Have You Done To Your 3rd Gen Today?

I broke my arm last July and it's required two surgeries and a lot of rehab. Suffice to say my parts shelf was overfloweth. Until I picked her up from the best in the business, Stellar Built.

BTF Fabrication LCA's
Marlin Crawler lca frame brace
Gussetted spindles with JD fab double shear heim steering
Power Brake kit
Archive Garage Rear shock relocation
14" Bilstein 7100's
Wifey air line kit with air chuck in each wheel well

She handles soooo well. Big ups to all the fab design shops named above for all their great products

Can't wait to get it dirty!

 

have the same one, its the perfect phone mount

 

How well do they work with Otterbox phone cases??

 

I’m not sure but it does come with a magnetic ring with double sided tape to attach to your case. I didn’t have to use it since it worked well with my case.

 

Installed a rear seat delete yesterday. Looked at goose gear and didn't like that it used plywood. Went with campcargokits instead as its made out of HDPE and extruded aluminum. Planning on building a battery box out of HDPE and extruded aluminum in the space thats not covered by the platform.

 

Did the ride height change at all?

 

It did. The front went from almost 3 1/2 inches to a little over 2inches of lift. Rear went from 4 inches to 3 1/2.

 

The ride is really nice. Haven't gotten to test them off road yet but hopefully soon. I put the adjusters to the recommended settings and the rebound is a bit harsh so I turned the low speed back 2 clicks so we will see how that goes.

 

Installed a different switch mount for under hood light.

https://www.etsy.com/listing/156306...eeea6e1e4bfb87ca655eb6035ef7f296fb:1563068112

 

This is awesome.
Where did you route the wiring?

 

It runs under the black fender plastic and into the hood at back where the hood hinge is. Under hood light has been mounted for 2 years now with no problems, just updating switch location

 

Why couldn't you go get an 8MM bolt from home depot or lowes?

 

Does it charge the phone magnetically also?

 

We have two Lp9s on most of our company vehicles. If you want one and done, the Lp9 is the answer! I'm glad to hear you are enjoying your lights. If anything comes up, feel free to reach out!

Best,

Brahian Herrera | Forum Sales & Support
Email: brahianh@bajadesigns.com | Phone: (760) 560-2252 Ext 201

 

Welcome to the 3-pedal gang!

 

That rear shock relocation ain't playin'! Dayum.

 

Did this yesterday, after 3 years of ownership.

 

Thanks for the feedback. I've got the same shocks ready to install and some of the reviews about ride quality are concerning. I was thinking about getting them re-valved first, but I'm just going to install them and run them as is.

 

Had an oil leak that I just noticed last week. Luckily it was the oil filter and nothing major. I probably just didn't use enough oil on the o-ring and it got bunched up.

Either way, today I used it as an excuse to get an upgraded filter wrench and replace the plastic filter housing with a metal one. Interesting enough I found that I can now hand tighten the filter housing all the way down and couldn't with the plastic one. Anyone else notice this?

 

Got the stormtrooper a pedicure. AT4W Wildpeaks.