What Have You Done To Your 3rd Gen Today?

Finished my bed drawers...mostly.
I still need to;
-Figure out hooks to hold my MTB helmet and my floor pump inside the main drawer.
-Make some dividers for the main drawer to keep my chainsaw and recovery gear separate from my MTB gear
-Make some dividers for the pantry drawer so my stove and pots stay put.
-Maybe make a notch in the side of the fridge drawer so I can get water from my jug or maybe just put some spacers under the jug. Don't know yet.

Picture 3 is my Tailgater Tire Table, I made a ledge inside the main drawer cavity to store it.
I think I finally have the perfect drawer system for my needs, only took 3 tries.

 

6” ?! Dang that’s killer. Here I am settling at a 1.5” front and .5” rear.

Still adjusting the fronts as I was a bit higher than 1.5” and I haven’t gotten that .5” rear block install yet.

Ultimately want to go 2/1 but that’ll be the day I finally get some 285s.

 

thanks man!
Was 77.8 weighed at Tokunaga’s. 9 minutes felt like 9 hrs hahaha! Thought I was gonna snap my nitro

 

I was going that route but decided on the first replacement to get the whole wiper blade assy. I think I will get just the inserts next time. I think I messed mine up one icy morning and didn't realize it, if it weren't for that they were working great.

 

https://belmetric.com/

 

that's great! Amazing.

 

You’re going to be disappointed… it wasn’t a paint job.

TRD Off-roads come with color matched dashes. If you want an OEM color, maybe perusing the online junkyards is the easiest way to go.

If Inferno is the color you want to go with and paint it yourself, then I believe Rustoleum Paprika is the best color match.

Ah… I see you’re Lunar Rock. The Off-road came in that color too, so maybe there’s a used one out there?

 

I appreciate your concern. All the stuff I’ve seen (including the oversized cup holder replacement) and toys they make at work to demonstrate 3D printing are hard plastic. These are different. They’re not as hard as the OEM ones I removed.

 

Wait, off roads have a matching dash to the paint? Is that just one or two years? Mine is a cement and my interior is just that generic gray color.

 

If they manage to gall threads would you really trust them with that? Just a thought…...

 

lol. A little toothy of a response, no?

 

285/75-16 KOs. Beefy!

 

ARB like Vent installed, Rear Dif, Tcase, and Tcase actuator is now vented under the hood. Actuator vent tube looked a little mangled, so trimmed it up 1/4" to solid tube. I thought the transmission and front dif vents looked good and located high enough that I think I won't vent those I'll leave them as is OEM.

Last pic is the front dif vents, sitting next to fuse box.

 

Attempted to catch the northern lights last night (no luck).

 

It wasn't all OffRoads. I think it was a package thing. My '17 has MGM and (had) chrome plastics.

 

TPU is soft. I haven't tried any yet to know how soft, but I'd guess it's too soft for that application. There are new materials and processes/equipment showing up in the marketplace all of the time. Those bump stops are likely printed in a liquid process.

 

What an inconvenience. I drove to 4 Ace Hardware's and 1 Home Depot. Ace had the correct size and type of bolt except it wasn't a flange head. I could have tried it with a washer, but that seemed just as janky as 303's customer service. What a joke of a business.

Maybe on one of the 2 they sent. The second one looks like they tried to send it through a paper shredder.
I ordered a die/thread chaser from HD. Should be here in a few days.

Also ordered 4 of these... (M14x1.5x80mm)

https://belmetric.com/hex-flange-bo...0FMzxiEAYYBCABEgLCrvD_BwE&sku=BFD14X1.5X80YLW

I figure there should be at least 2 good ones. A lot cheaper too.

 

You must have something special. All the used ones I drove had black dashes with the graphite accents, and when I got my new LR it was the same.
I like it though...I guess I'm into basic. And that means yours can be unique if it wasn't that common.

 

My Cement taco came with the inferno dash trim. Matches the black interior with orange stitching.