What Have You Done To Your 3rd Gen Today?

thank you, appreciate it!
It’s too fckn tall
Seriously, it downhill spiraled so quick. Started 3” OME/Bilstein - killed the OME pack/broke a front shock
Went Pro comp 6 - went Fox coilovers with resi front, custom Alcan 6” leaf pack, Bilstein 5160 rear, hammer hangers etc.

If I were to rate it, prolly a 6” front (cv’s are flat as stock) and almost an 8” rear. It’s fun when you have to load big fish in the cooler lol

 

Where is the drawer at? We need to see this guy opened up. Also looks like the sides both fold down and are removable?

 

The drawer slides/extends lengthways right underneath the flatbed surface. Drawer face is essentially the “bumper”. Right in the middle where the license plate mounts.

And that’s correct. The side gates fold down and are also removable.

 

Can you run a die down those and clean them up? Obviously not ideal. Pretty evident they’re damaged. Looks like someone tried to pound them in.

 

Sick! I love it. Did you source the paint in a rattle can? I've been able to purchase Hellcat and STI colors in rattle cans for little stuff like this. I really want to do this now. SO sick.

 

The question is...did it come with a CARB sticker? ( Nice rig BTW. Love the stance. Makes me wish I went higher than 2.5 with the lift...)

 

Spacers on all four corners

 

Not for sale or use in Cali..
I live in Hawaii.
Thanks for the kind words, but trust me..no you don’t haha. Find a way to get 33s and honestly, that’s the perfect height/tire combo.
This fish didn’t just tire me fighting it, getting it in the cooler in a high truck was just as bad. Lol

 

That was the plan. I'm going to try another Ace Hardware location. They might even have these bolts in stock.

https://www.tacomaworld.com/threads...cks-help-resolved.730249/page-3#post-30569469

 

Even without a die, a small triangular file will clean that up in a few minutes. Then tell 303 Shock Service they are going to get more than $9 worth of grief on the board for their bullshit.

 

Nice mod! Looks sharp

 

Hehe, I know what you all thinking.... Typical Hawaii Tacoma!!!

Brah, nice fish in you later post! How big? Congrats!!!!

 

Finished my bed drawers...mostly.
I still need to;
-Figure out hooks to hold my MTB helmet and my floor pump inside the main drawer.
-Make some dividers for the main drawer to keep my chainsaw and recovery gear separate from my MTB gear
-Make some dividers for the pantry drawer so my stove and pots stay put.
-Maybe make a notch in the side of the fridge drawer so I can get water from my jug or maybe just put some spacers under the jug. Don't know yet.

Picture 3 is my Tailgater Tire Table, I made a ledge inside the main drawer cavity to store it.
I think I finally have the perfect drawer system for my needs, only took 3 tries.

 

6” ?! Dang that’s killer. Here I am settling at a 1.5” front and .5” rear.

Still adjusting the fronts as I was a bit higher than 1.5” and I haven’t gotten that .5” rear block install yet.

Ultimately want to go 2/1 but that’ll be the day I finally get some 285s.

 

thanks man!
Was 77.8 weighed at Tokunaga’s. 9 minutes felt like 9 hrs hahaha! Thought I was gonna snap my nitro

 

I was going that route but decided on the first replacement to get the whole wiper blade assy. I think I will get just the inserts next time. I think I messed mine up one icy morning and didn't realize it, if it weren't for that they were working great.

 

https://belmetric.com/

 

that's great! Amazing.

 

You’re going to be disappointed… it wasn’t a paint job.

TRD Off-roads come with color matched dashes. If you want an OEM color, maybe perusing the online junkyards is the easiest way to go.

If Inferno is the color you want to go with and paint it yourself, then I believe Rustoleum Paprika is the best color match.

Ah… I see you’re Lunar Rock. The Off-road came in that color too, so maybe there’s a used one out there?

 

I appreciate your concern. All the stuff I’ve seen (including the oversized cup holder replacement) and toys they make at work to demonstrate 3D printing are hard plastic. These are different. They’re not as hard as the OEM ones I removed.