2012 pre runner stock

New to this and need advice. I have a 2012 pre runner double cab 4cylinder. I want bigger tires that won’t rub or little trimming needed but I don’t want a lift if I don’t need it. I also want it offset but just alittle enough to tell it sticks out from the body. Anything will help thank you.

 

Welcome to TacomaWorld. 265/75/16 with 0 offset is a classic setup. If that doesn't suit you, use the search box at the top right since this is possibly the most asked question ever.

Also look here for ideas: https://www.tacomaworld.com/forums/wheels-tires.15/

 

Thank you for the reply. I still trying to figure out this forum. Never used one before.

 

Are you just wanting tires? Current wheel size? If doing both. Go with 17x8 0 offset and 265/70/17 and call it a day.

 

With the 4 cylinder, you probably have 245/75-16.

You could just go to the TRD size, 265/70-16 for a wider beefier look (will fill out the fenders a little better), or like others said, 265/75-16 is a hair bigger (32 vs 31 inches, essentially), and will make the biggest difference without needing modifications.

 

No I’ll get new wheels and tires. Just stock suspension. Want wider bigger tires that poke from the body but not a whole lot and little to no trimming.

 

Yeah I’m looking at the wild peaks for tires but haven’t decided what wheels to get. I’d like to use 0 offset.

 

These are 265/65/18
Would these work at all??

 

265/70/17 with 0 offset. Very slight rubbing on the front passenger side.

 

4th gen wheels are a little different, smaller bore, different offset, etc. I believe people have made them work with adapters, but direct bolt up, no

 

What wheels do you have??

 

American Racing, got them on marketplace for $200. Can't remember the specific model number, they're Teflon coated from 2015ish.