4wd does not work

I went mudding the other day and it was working fine at first and now it does not. The green 4wd light does not come on in the gauge cluster and 4wd does not engage. Any thoughts on what's going on?

Also my cv axle is leaking. Should i replace the whole cv axle or can I just replace the boot? Thanks.

 

do this on the boot
http://www.fjcruiserforums.com/foru.../81947-cv-boot-seeping-grease-simple-fix.html

your 4wd problem sounds like some electrical components got wet, Is there mud up on the transfer case?

 

yes there is mud everywhere under my truck

but when i was in some mud i was spinning the wheels in 4wd and i switched gears to reverse and it made a loud clank noise. idk if i screwed something up or what

 

first of all go to a self service car wash and clean everything.

Did you let off the gas when you shifted, or at least let the tires stop before shifting?

 

okay.

I left off the gas, but did not let the tires stop

 

You may have damaged the hubs then, but def check the fuses like whippersnapper said.

 

i checked one of the fuses and it was good. is there another one under the hood?

Yes they were still spinning.

 

not sure if there is a 4wd fuse under the hood but there are a lot of them there. All the fuses are labeled under the lid of the fuse box.

 

yeah that makes since i was in a hole and did not want to get stuck lol

 

Alright thanks, I will go check and let yall know.

 

Yikes! I can imagine the noise.