Wisconsin area events, Mod Day May 24 at Thatbassguy's

I certainly don't know what you're talking about...

 

Well played, sir

 

So um yeah...
I could be there early.
Breakfast is always awesome when someone else is cooking, how bout eggs benedict with a couple pounds of bacon on the side??

 

Hollandaise is fucking amazing when done properly. I just don't know if sous chefs are in the budget. But, it's an open discussion at this point, because I fucking LOVE Hollandaise sass!

 

My sticker arrived in time for our upcoming driveway sewing circle!




Not as cool as a third coil set, but after looking at all the coil specs and doing all the math, just putting some 15mm spacers on my old dob coils is probably the best bet to get the ride height and best spring rate for my weird in-between daily driving weight. That said I don’t really know what I’m doing trying to figure out suspensions.

 

Yes, bacon for breakfast.

Please

 

Thought is bacon, scrambled eggs, and hash browns. Maybe toast, pancakes, or waffles

 

The Difference SHOCKED Us! Budget Suspension Upgrade Blind Test

Scroll to the 33:00 mark for the results. They are in the crawler at the bottom of the screen.

 

8:00, is that correct.

 

I guess I better set some times! I was thinking 9 for breakfast, but I'm flexible.

I swear I'll make a poll tomorrow

 

We can be there at 8... heckling the chef...

 

I would expect no less. I look forward to it!

 

Ok

 

That’s a good video. In my case, I just want to set my rear ride height just right. My previous dobinson coils were perfect until my 4runner started to get heavier. Then they started feeling a bit too soft and they squatted a bit too much. I got the heavier load coils from Dobs meant for a bit more weight, but never liked how high they were. Looked at other coil options but the specs I found on other coils put them at lower or the same spring rate as my original dobinson coils. Hence using spacers and going back to my first dob coils. Maybe later I’ll need to play around with different rear shocks to see if it helps with the wallowy feel I had on my first dob coils.

TLDR: i’m officially chasing my tail lol

 

New poll, y'all!

 

You know there are a few companys making a nice cantalever rear suspension for the 4Runner

Seen some in action. So much flex doesn't even seem like the axle is connect to the frame.

 

I'm sure they're reasonably priced, as well.

 

You’re right. This is probably the simplest way forward. I should just do this.

Also, I should probably put in an order for portals, because I’m going to eventually need new lower ball joints, and rear axle seals and I heard their kit has some nice ones.

 

No need.
@Shellshock found a video where you can build your own portals for $299.

 

Don’t think I didn’t watch that with my thinking hat on. The only drawback is that I’d have to seperately buy those lower ball joints. And that I’d probably end up with 5 reverse gears and one forward gear.