Ontario BS Thread

as someone who had a broken wire, not fun diagnosing it lol

 

Should be pretty evident if it's poked by a stick.

 

the sensor

 

the cheaper option

 

Was it in the rear? Did you have guards? https://archivegarage.com/products/tacoma-wheel-sensor-skids-2005-rear-axle

 

front

 

This came in, Toyota P/N TOY12319-HTSTR-XL Make Kanaduh Great Again!

 

I never thought this was in Japan. No Tokyo drift hear the 3min mark is on point.
https://www.youtube.com/watch?v=_xOBYWdNXlI

 

How important is it for this part of the abs sensor to go into the hole?



Of course that part broke off and I have not yet been able to clear it out.

 

The guy with the F250 scares me if he takes that kind of effort to park

 

Splice the wires and connect them to your other wheel sensor, problem solved /s

try self tapping screw driver method to pull whatever is there, may work. But it needs to be pretty close to the magnet inside of the wheel bearing to pick the signal. Worst case wheel bearing has to come out, couple beers job.

 

The error and light went away as soon as I connected the sensor lol. I zip tied it for now. Tried screwing it already

 

^The error and light went away because you no longer have an open circuit. However, you will probably get random ABS or VSC activations because the RH front wheel speed isn't read properly.

 

5-10 min wheel on job now may be disassembling wheel hub

 

that's what i started with and look what it turned into. its better to just live with the light.

 

If it was only a light, maybe, but it disables ABS and 4wd

 

FJ case swap!

 

Here is your problem, you got the wrong transmission…

 

Emotional Damage!

 

You first