What Have You Done To Your 3rd Gen Today?

Shovel time. This is where traction boards would be amazing.

 

What mount are you using for your Mini??

 

GREAT looking garage

 

Finally got around to putting a winch in this bumper. Had to get a little persuasive with the hood latch support and clock the clutch forward but fits nice and snug. Working great and spent the afternoon hauling oak firewood up.

 

Did the front shocks yesterday. I didn't take pictures during the install - I just wanted to get it done. They're adjusted to the lowest height setting. I didn't install the Bilstein UCAs. Not sure if I should or send them back. Not a big fan of polyurethane bushings, but they definitely look better than OE. Not planning on lifting, but who knows what I'll do in the future.

 

You don't see too many on here that are willing to use their Tacoma as a tool, props. I assume you do understand that has the potential to take years off the lifespan?

 

Probly fine

 

One time I hauled 2 bags of mulch and a 4'x4' piece of plywood.

 

Plywood? That's what the minivan is for.

 

Unimaginable! Lol

 

Nothing super cool. Just building some wiring harnesses/runs. Redoing a lot of wiring I’ve done over the years. As you get older you learn more skills, get new tools, new tricks, find WAY better materials and components.

It’s nice to refresh everything and make it look good. And even more importantly, everything matches, it’s labeled and I can’t forget anymore where the wires are running. Lol.

 

Nice! Something I’ve been wanting to do myself. As the truck changes, so do accessories.

 

Yup! Things change! It’s been a lot
Of fun dialing this thing in.

 

looks good

I installed a GFC topper in September, been wanting to get some wiring re worked for that and I may be doing the JD fab inner fenders soon. When that happens I’ll want to clean up a lot.

 

And I thought my G003’s were chopped/feathered! Nice seeing the truck doing work!

 

$32 Kaishengyuan Magnetic Car Phone Holder for Toyota Tacoma 2016-2023, 3rd Gen Tacoma Dashboard Clip Cell Phone Cradles Adjustable 20x Super Strong Magnet Phone Stand Phone Mount Fit for All Smartphone

https://www.amazon.com/Kaishengyuan...x=tacoma+phone+mount+magn,aps,181&sr=8-4&th=1

just get this one, its 30 bucks and super simple

 

The TSS sensor bracket is what I’m referring to. It’s difficult to describe, but if you perfectly center the camera on the overhang of the grill just in front the garnish, you’ll need to slightly trim the TSS bracket (that sits behind the garnish) to get the nut for the camera to sit flush.

 

I understand you're trying to be funny because like hey, look at me. But doesn't quite raise to the level of what the guy I replied to is doing.

 

Here's how I did mine a while ago if it helps. Drilled a hole out underside of the logo area and passed it through, I used a 3d printed spacer I on the rear since the screw portion was long too.

 

Washed and oiled the air filter today.