2LM PnP - Plug and play 2WD low range for the 3rd gen. Tacoma

I was wondering what switch are you guys using from AOB if you got one of the 1.25" smaller one for below the 4wd knob in the center?

Unless I am missing something the 2wd low one that they offer is only for the larger spots.

 

They screwed up the website and made it impossible to find without searching. Searching SW978NB ought to get you where you need, assuming you want the blue that is similar to stock.

 

Thanks, I spent several minutes and could not find it when I used their filters.

 

Yep, I bought a second one recently and had to dig way back into my old emails from the first purchase to find the number. I probably wouldn’t have been able to find it otherwise.

 

What did you get a second one for a spare?

 

I had 2L a couple years ago, regeared deeply, sold it and the switch because I no longer needed it. Mainly because I didn’t like how it functioned out of the box, and so when I got the regear it was enough for me to ditch it since I no longer truly needed it.

Then I realized I could fix the things I didn’t like (mostly the error message if you shift back to 2wd before unclicking the switch), so I bought another 2L kit, reworked it to my liking, and then needed a second switch.

 

2LM harnesses are on sale $15 off until the end of the year. Discount is applied automatically when you add it to your cart.

Happy Holidays everyone!

 

Sales of the 2LM harness will end 3/31/2025. I will be retaining some stock to handle installation issues, repairs, and replacements as required. This decision was made based on a number of factors, which I will not get into here. At some point in the future I may resume operation but I can not guarantee it. The website will go offline as of 4/1/2024 and will not be available. If anyone has any questions, you can send me a PM here. While I'm not very active, I do get notifications and I will respond as quickly as I can.

Thank you everyone for your support over the past several years.

 

Hope whatever you've got going on is resolved in a likeable manner

 

Tariffs and parts/ fab uncertainties?
Thanks for the memories... love the 2whl LO function for farm road crawling and backing up my camper.

 

Is anywhere still offering a 2lo harness?

 

Or maybe a schematic so some wiring nerd could duplicate it?

 

I believe it’s early in the thread, but it’s not just wires, but logic. The originals were bulky and OP worked to make it more manageable. Your best bet is someone removing or didn’t install.

 

There is no logic to it. It is just a switch actuating a relay to throw numerous circuits at once which bypasses the ADD while making the computer think the ADD is still functioning as designed.

You can build your own 2Lo kit with 4 separate relays and a switch to achieve the same function. Or use a 4 pole relay like in the kit, but the problem is you need to get the factory connectors to plug into the ECU and dash harness and those are hard to find. Maybe @lapoltba can share where he used to get them since his harness is done. I couldn’t find all the pieces I needed.

The kits also included a resistor built in to take the place of the missing ADD motor, but my testing found this to be unnecessary on a 2021, which uses the same computer from 2020-2023 based on trim. So maybe the testing that was done on earlier trucks (2016-2019) found the resistor to be necessary, but I definitely didn’t need it and I have done plenty of testing to confirm that.

 

By logic, i meant more than just a wiring harness… requires a logical solution.

 

I mean yes, but ultimately it is just a relay built into a wiring harness. Still pretty simple. I’d be interested in helping make them for people but I still don’t know where to get one of the connectors from and I don’t really have the time for it anyways.

 

Probably MegaZip… Japan.

 

If I ever got my 2nd one done I’d have my OG to sell. But it’s deep on the list of work, many things above it and so little time.