Sequential mirror turn signal mod……..good experiences pls

According to others, Meso V5s even doing the reverse sequence don’t match the speed and timing of stock.

Personally I found all the aftermarket options unappealing, I embraced the chrome and ran the stockers. My truck did not have them when I bought it, so I actually had to specifically seek them out. I am happy with that choice.

 

Wow, that's good info to know since they are significantly more expensive than the High Flying lights! I guess I need to catch up on the entire 4 previous pages to see if anyone found a satisfactory sequential lights. I mean the MESO ones have a dip switch to change the sequencing, but for the price they want, they could have added a trim pot or something to adjust the sequential rate in case there's lots of variance from the factory. But hey, they didn't hire me to program them!

 

Good info on the MESO.

When I looked at how the High Flying Amber Sequentials operated at time of install, they seemed to flow with the OEM LED Headlight turn signal/hazards on my Sport.

Had them since 2022 and they still operate as intended.

I'm happy with their performance.

 

I’m looking at purchasing a set of these but is it all plug and play or do you have to splice wires to install the Amazon version.

 

The High Flying lights are plug n play. Getting the cover off the side mirrors is really the "hardest" part, but just use a plastic trim tool and it works. Sounds like stuff is breaking bad, but is normal snapping sounds. You do need to apply quite a bit of pressure to snap the cover back on too. Be sure to check the turn signal plug polarity by testing the turn signals before you button everything back up. If they don't work, rotate the plug and try again, should work with correct polarity.

 

I had my adventure with discretely removing the plastic cover off the side mirror.

Arrow shows where the polarity plugs are connected--check operation before putting it all back together.



I got the smoked sequentials.