Engine shake/shudder at idle or at a complete stop

I am currently at 62k miles on my 2018 Tacoma 2.7 and i recently replaced the spark plugs and kept the same old coil packs and about a month or 2 i started to get a misfire on cylinder 2. So i ended up replacing both the spark plugs and coil packs which fixed my problem but now at idle and when i come to a stop after running the truck i can feel a little shake or vibration which wasn’t there before. Has anyone had that problem?

 

Need to put a code reader on it. If you don’t have a code reader stop by a auto parts store.

 

Even without a check engine light on?

 

Yes without a check engine light. It’s a free scan it should help

 

Ok ill look into it, thanks!

 

Mode 06 will tell you which cylinder is misfiring.

 

Right now is not misfiring at all. Its just a vibration i feel that wasnt there before. The truck runs fine.

 

Are you the original owner, or bought 2018 Tacoma used? Could be engine mounts going out, loose bolts, anything.

 

Yes i bought it brand new from a Toyota dealership. But ok ill look into it, thanks!