Depo Racing +2 Long travel kit Honest Review

King cans

 

I thought about cans

 

bilstein all 4 corners

 

Nice

 

So another stupid question. What axles are people running with the plus2 kit? It seems like my axles at full drop are binding so I've had to shorten my limit. Straps to keep that from happening but to be honest I haven't really gained much travel over what I had originally because of that so I'm just curious . So the axles that I have and are running are a plus 2 shaft that I rebuild the stock Toyota inner and outer with. So I'm not sure if there is any other axles out there and allow for more articulation clearance I guess

 

Maybe these?

 

Seems like a lot of folks run CVJ remans.

 

Yea I sent them an email so waiting to hear back from them

 

Does anyone have the envelope dimensions for upper or lower ball joint?

Mine will need to be replaced sooner than later.

 

Anyone know what these larger bushings are for?

The smaller ones seem to be for the limit strap bushing.

 

I

Did you check the other end of the limit strap where it attaches to the lca?

 

They are for your coilovers . Depending on which misalignment spacers they currently have in them, you may need to run these ones

 

I ended up using a hex head for the LCA bolt, no travel limitations.

Anyone know a good place to buy CV parts, found my cage broke when installing the +2" shafts. Having trouble locating a spare OEM CV.

 

For OE parts used. I use this site
http://www.car-part.com/

 

That helps a lot! I've been searching every yard separately!

 

Yea that site is the shit . And most of them will ship too

 

Went with the Fox 2.5" DSC from Accutune.

 

Questions,

How much preload do you guys typically add for the Taco lean? I have lowered the preload nut 1/2" so far, seems like a lot for not having anything aftermarket (bumper ect)

Also how are you guys running your brake lines? I modified the factory brackets with longer trail gear lines but they seem to be a little too long...

 

CVJ

 

Yea that's what I'm leaning towards. I emailed them and they said 28-30 degrees . . I thought me +2s that I built would do the same but guess not