Tractors, Mowers, Chippers, Trailers, Chainsaws, Generators, Driveway Erosion Control, ETC.

Started a little job for a neighbor yesterday.

His place is like mine, completely surrounded by trees/brush & over the years it has gotten away from him to where he just has a little yard left & a few paths to area's. The rest has been totally taken over by briars & softwoods.

He's retiring next week & wants to start getting his place back into shape, so he's hired me to clear up some brush & so on.

Went over with the tractor & the hog .... Started at his front porch area & with the piranha bar started pushing downhill away from his house. Its steep. 15 degrees & more down to a drain out bottom then back up the other side.
Of course it rained the night before. Told him we would push some down, hog it & then let it dry for a few days & come back .... Push some more. Work our way to the bottom then move over to the other side.

Sounds simple right? Most of this was 10' high or more. Should of took pix.
Spent about 2hrs pushing down hill clearing soft woods & briars. Then flipped around & started hogging it.
Did all the hogging facing away from his house going downhill backwards. Took about an hour to do that.
At this point the ground was getting too slick for travel & was starting to slide or spin. That's where it was time to stop for the day. It was also where my back had had enough. He was a little disappointed that I stopped at 3hrs ish, but he also could see it was getting counter productive. Told him we would let this dry & do another couple hours next time.
He did really like how what we did turned out though. Already doubled what he has to mow & its mow ready for his rider when it grows in. Pushed out dozens of soft woods, several of which where near a foot diameter.

Worked the tractor pretty hard. Later after we run out of tractor able stuff will take the excavator & mini hog on it to try & some detail hard to reach stuff.

Today is back recovery day.

 

Got mower running and back in neighbor’s hands. Repairs made:
Carb rebuild
New flywheel shear key
Valves adjusted to spec
Replaced blown head gasket
Replace defective Auto-choke thermostat.
Was able to drill out broken exhaust bolt and broken extractor (my fault) using carbide bits . Installed Heli-Coil.
Result!

 

Well good afternoon, while mowing this morning broke the almost broken deck belt on the little JD. Good thing I had a new 1 ready for action. But while I had the deck off I put the Gator blades on. Hard to tell but the discharge was farther out. Which I liked.

Meanwhile somewhere on the creek doing some Helene cleanup

Not done yet because of thunder.

 

I need to rent one of those 10-12K units

 

I know right, I am prepping the wife for 1. She said we can't afford one of those, my answer was not yet.

 

I planted that seed too, pretty sure it died quick

 

Thats a NO!

 

It'll happen just need to get the house paid off. That's in a year.

 

Major pruning and overhaul of the front rock garden. I’m too pooped to pop now

 

Neighbor came back and finished the branch along the driveway.

 

That is the unfortunate truth.. it doesn't take much for the stock leafs to bend the wrong way and ride the bump stops, hence the K2500 for doing hard work.

 

This guy posted a picture of clearing an area for a batting cage. I, having helped my son to get to a very high level of baseball suggested this wasn't a good site. His response is to go out and look up the results of the games, screen shot them here, and make fun of it. I reply there may be a better use of your time. And for that you suggest I'm retarded? Why do you all think you have to one up everyone? Why is it so important to feel you've "dunked" on someone? It's really sad and I feel sorry for some here.

 

Did you go do some weed wacking like suggested?

 

There IS a better use of my time than to read any more of your whining... IGNORED.