What Have You Done To Your 4th Gen Today?

The plates are on sale right now for $68.

 

I thought Toyota change the top plates for '25? The ones on the 4Runners are different.

 

Added some Total Chaos Upper control arms and some C59-819V springs in red.

 

Mine's the '24...if what you say about the '25's is true, you have nothing to worry about of course.

 

@Catfish21 You're gonna want the ChaosFab adjustable panhard bar, too, else your rear axle is no longer centered due to the lift.

 

I hope they did change something, that would be awesome. I know when I looked at mine they appeared at a glance to be the same so I went ahead and installed the tops/caps. They went on without any complications so I assumed they were the same.

 

My guy, are you paying for my shit? No? I’ll get it when I get it.

 

I would have done teal springs to match the kings.

edit: maybe send them to powder coat to match the wheels.

 

Thanks champ, didn't realize this was your first time posting on a forum.


@bbartol No change to the 2025 tophat. The steel 4Runner tophat is not being used on the Taco.

 

Added the Prinsu Pro Top Rack and the regular Prinsu cab rack. Pretty pumped with the set up! The regular prinsu cab rack ended up being $350 cheaper than the Pro and made it much easier mounting to the roof with my tent and top rack already installed since it utilizes different feet. Highly recommend saving that dough!

 

Thought about it. Wanted to. But got impatient

 

Any problems closing the gate with the tonneau cover on?

 

I don't see much opportunity for this panel to interfere with a tonneau cover, but my post you've quoted does not imply I have one. I do not.

 

Holy lot of colors going on Batman.

 

My bad I thought I caught a glimpse of rails in the pic...thought it just might be folded up.
My back flip interferes with my tailgate to the point I have to close it quite firmly. I figured with extra thickness this will be no Bueno.

 

No problem for me. I’ve got a revolver cover made by Bak and the tailgate opens and closes fine—— plate doesn’t interfere at all. If you have the bakflip cover made by the same company, my guess is they’d be similar. If a pic would help you out let me know and I’ll post.

 

It’s broken up by the front and back

 

From the looks of your panhard rod it looks like you got a ton of lift from the 819V's. I installed the 819V on mine and got no lift with the weight I carry. I upped to 821V+1/2" spacer, and my panhard is only slightly elevated.

Here is another solution to the panhard rod. Instead of getting the adjustable from somebody, you can get a correction bracket. This is the direction I will go to flatten out the rod.

https://drkdss.com/products/b-o-t-c-k-bolt-on-trackbar-correction-kit-gen3-tundra-copy

 

Already got it coming.

 

Thanks for sharing that, bookmarked it. Heck of a lot more affordable than replacing the panhard rod.