Shop Time w/T.W. Friends. Torque wrench on spark plugs, we need answers so cast your vote now

And that is why I can’t have nice things..


FUCKERS!!!

 

whadda ya expect, I gotta fucking home a-c failure that I gotta replace, imma savin my dead presidents....

 

FIFY

 

I have a calibrated hand, but I have been known to check myself for recertification.

 

You can, just hold it by the ratchet head.

 

i love how absolutely everything on marketplace is always worth $1500.

i don't think there's a single straight panel on it. not even the frame...

i guess the brakes still might be good?

 

you'll need a pretty large one for bigger motors.

i run the acmount in all my vehicles. the only thing it's failed to start is a full size semi truck.

$60 Acmount P100 Car Jump Starter, 5000A Peak Lithium Jump Starter Battery Pack for Up to 10.0L Gas or 8.0L Diesel Engine, Safe 12V Portable Battery Starter Power Pack with LED Screen & LED Light

https://www.amazon.com/dp/B0B55RFM1Z

my shop uses one of these 'start-all' packs for shop use.
https://www.unityparts.com/van-jp-12-10000-start-all-jump-pack/?gQT=1

not cheap, but it usually works every time, except for the cases where the batteries are D-E-A-D. then we need that in a combination with one of these.

$2,151 Clore Automotive HT1224AGM 12/24 Volt Commercial Charger/Starter with AGM Batteries, 1 Pack

https://www.amazon.com/Clore-Automotive-HT1224AGM-Commercial-Batteries/dp/B07CSSSBN8

and when they're that dead, one of them needs to stay connected to serve as the vehicle battery while moving the vehicle after jump starting...

 

It’s not even 4 wheels… it says one of them is cracked!

 

A view of a bowling alley most never see.

 

He knows what hes got!...no low balls! If ad us still up, means its still available!

 

And to a Dewalt no less

 

But, if it works it works…


(Note: I so rarely see a safety shield and handle on a grinder.)

 

Good morning everyone

Yet another Thursday to get through to Friday.

I hope the guessers are right, it’l
be the best stretch of the season:

 

Good Thursday morning, friends! Hang in there, tomorrow is coming!! And will be gone before we know it


Came out this morning and there was a skunk in the yard, luckily it wasn't looking to make a friend and scurried off the other way when I tried to talk to it.

 

That's where my ball went

That looks like a hot mess

 

That right there is why we pay you what we pay you. Truly a once in a lifetime prize package. That is the only best one this week

 

The full-size ball versions look like giant dryers from the backside, not sure on the candlepin. Is the brand the usual Brunswick, or AMF?

 

I always take the safety shields off but use the handle a lot of the time unless I'm holding a piece to cut with a cut off wheel on one and one handing it.

 

Sounds like you need a chop saw. Grinders grind, chop saws cut… I have a small, now wanting a big.