285/75R17 Perfect Size on 3rd Gen

Thank you! I originally purchased these in a -38 and couldn’t get the fronts to fit without rubbing, and that was even after doing a CMC, fender trim, and alignment, so I settled for the -10 with no issues at all.

The light gray color was my first choice, but then went with black on the second set.



Here’s the matching spare in the bed for size reference.

 

Here's an update on the 285/75/17 BFG K03 with the Rays 57DR-X wheels

 

You got any more photos you can post? I’m on the fence between a 295/70r17 and a 285/75r17

 

Great looking front bumper. Don’t see many color matched ones.

 

Cab mount chop was completed this past weekend, and I just installed the 285/75r17. Mounted on 0 offset forged Relations Race Wheels.

Went with Toyo ATIII since they are the lightest weight C load option in this size. They are 59 pounds and still have a 3 ply side wall.

 

does your bumper still have the sensors in it for The parking in blind spots?

 

No blind spot monitoring. This Bay Area Metal Fab bumper did come with 4 holes for the 4 parking sensors, and those all still work great.

 

I’m on 285/70r17 on Toyo R/T Trails. -10 offset wheels with 1 inch wheels spacers.

I believe 285s will be easier to find in a better load range. Weight should be considered when picking tires (if you want to maximize MPG).

 

I’m on a 285/70 duratrac right now that’s pretty worn. I live in the PNW and need a good snow and ice tire… and the KO3, while heavy is probably the best route for me. They just look so small and skinny. The 295 BFG is almost the same size as my worn GY…

 

No kidding… Go full 35s.

Things like wheel offset and such will make 285s look larger. All about perception.

Do you have fitment all sorted out if you went to 295s?

 

Yes. I’ve got a pretty aggressive CMC and my pinch weld is all bent back. The inner fender is cut back a lot as well. I have tons of room in my wheel wells. Enough for a ‘small’ 35” I just don’t want the weight and to do the required supporting mods for a daily driver/weekend camping and trail rig.

My wheels are a 17x8.5 -10 offset. Which when pairs with a true to size 295 should fit in my wheel wells very nicely

 

Nice!

My 2019 Taco SR, 4x4 came with Landsail 265/70 R17 tires. Dealership swapped out the stock steel rims for the Black OEM Toyota rims. Looks nice on my rig.

 

Go with some 315s

 

been watching some videos lately and I am convinced 34s 285/75R17 are the ideal size for Tacos and 4Runners. They would be an easy fit for you.

 

I actually just ordered up some 34” falkens. We’ll see how they go! I got a C load, not an E..

 

Running 285/75r17 BFG KO3s on Rays 57DR-X 17x8.5 0 (had to get a spacer for the fronts to get to -10 and also make it hub centric)

 

Yes, I'll get some more soon. No CMC, I was only rubbing slightly on the fender liner in front of the wheel before the bumper went on. That issue is gone now. I have OEM UCA, 17x8.5 0ET Rays 57DR-X wheels & 285/75/17 BFG K03. TRD Pro Fox suspension - Eibach pro lift front springs - Icon AAL S2 rear.

Thanks! Painted flares next to finish it off. I haven't seen any painted either and wanted a more OEM + look.

 

You got any more front end photos of your truck? I wanna make sure the 285/75 BFGs don’t look too narrow

 

Now you've got me nervous. I just ordered my SCS F5s in a - 38 offset. I guess I'll keep my 285/70r17 BFGs for now