2025 Tacoma transaxle temp

Hey guys
2025 Tacoma Sport
I have a Scangauge that reads two temps
Transmission and Transaxle
Does anyone know what is the transaxle reading from ?
Thank you very much ?

 

In the 2nd-3rd gen there were 2 trans temps. one was pan temp (cooler one) and the other was tq converter exit temp(hotter temp). most likely same senerio wit the 4th gen

 

Curious how you getting hybrid state of charge.

 

On the Scangauge 3 you have the option

 

I meant that "hybrid" was not in your profile description and I was temporarily disoriented thinking you didn't have a hybrid. Now returning to my normal state of dizziness. Thanks.

 

On the older generation you had two sensors and I could see the immediate spike on one of them that I assumed was the TQ.
Therefore the more consistent temp was the pan
On the 25, I installed a Yoshimoto cooler with a165 degrees thermostat and run it of the line #6 that comes out of warmer/cooler puck. That line goes straight to the pan
I was assuming that the new lower temp would show on the transmission gauge not on the transaxle.

 

Based on your diagram is safe to say that the #2 sensor is for the pan being that is lower and #1 is for ??
Thank you Bud

 

That would be my guess. But to be sure, you can disconnect.

 

Great idea. Let’s hope the Christmas tree stays out and I will only see a single light out
Thank you