What Have You Done To Your 2nd Gen Tacoma Today?

Getting my Voodoo rack, plastic bed caps, and plastic from the bumper sprayed today (also might VP racing gas tank mount and floor jack pole ha) as well since I’ve got some time for the next week or so.

Was able to actually get all the bumper plastics off no problem without having to drop the bumper/part of the tow hitch assembly which was surprising. On the very end plastics on the bumper, you can get them off without breaking the plastic attachments (person before me broke the middle one) by getting the part closest to the license plate unclipped and the pushing the piece toward the front of the vehicle to get it out.



Else, managed to scratch my truck real good when the rack slipped Plan to respray or wrap anyhow but this was painful.



Also, have some serious rust to address… Anyone got the part # handy?
Edit: seems to be 52043-04010.. Picking up tomorrow from the dealer who’s getting it in from Jacksonville. Don’t want to be taking off the plastic again unnecessarily.

 

Good Lord man, I think you just need to get a new bumper. That metal is severely compromised.

 

New pads (Power Stop) and bled the brakes.
The calipers arrived first so I did those and had to wait for the pads to show up.

 

Did a handful of electrical, a crapton of body panel clearancing and trimming, raptor liner-d the bed, pulled a leaf and adjuated suspension.. the list is substantial..

 

If you’re looking for the reinforcement beam that should be the part number. https://parts.longotoyota.com/oem-parts/toyota-bumper-face-bar-reinforcement-beam-rear-5204304010

You may want to check your bolts and see if they’re still good. I replaced mine a few months ago and ended having to get new bolts

 

Started working on my battery/electrical system for the camping setup last week and gave it a nice test run down on Cape Cod with my wife last weekend. I don't like relying on electricity but its honestly reallyy nice to be able to charge phones, cameras, laptop to work remotely, fans etc. Projector movie night is like our own mini drive in movie.

 

American pie or varsity blues?

 

Hooked it up to the boat for day 1 of the MasterCraft reunion.

 

Neither actually haha, the first "I know what you did last summer" movie

 

epic. should follow it up with SCREAM 1

 

Agreed. The rest of the actual bumper is fine but definitely doing the reinforcement and potentially the hitch that attaches with the bolts!

FWIW rest of frame is mint so I don’t get shamed further Will probably coat it during my current time off.

 

only thing i see is that carrier bearing is on "wrong" but eh as long as it works.

 

How can I fix it? That was definitely my mechanic. Will be back in the shop next week so curious what to tell him

 

Those tabs are designed to “hang” in the mounting bracket. I’m a bit surprised a mechanic wouldn’t know that, even on a truck they weren’t familiar with, but it’s not a big deal. It’s just not technically correct. No harm, no foul.
https://youtu.be/6WvlVa7OzS8?si=IsnQsj_Mhpr3aSLe Fast forward to 16:20

 

id flip it over see those tabs hanging down they go into holes on the boxed portion. I've seen a few guys trucks with the tabs all full of like grass form hanging that way. but a couple of good strikes with a hammer fixes all that, or a cut off wheel
again not a huge deal