Newish member and I come with a puzzle

A/f heater good and efi#2 good

 

Did you check both sides of the fuse?

 

Charcoal Canister I’ve dropped the tank 4 times I’m hoping I don’t have to do it agin

 

Well the other tests involve accessing the AFR sensor connectors which isn't the easiest thing to do and probably not something you wana do with it hot.

 

Yes check both sides both those fuses are good also truck is still running witch is the longest its ran in 2 weeks I'm plus

 

No need to drop the tank to access the canister but lowering the spare helps, I wouldn't worry about that code just yet as it has no effect on drivability.

 

Ill check that tomorrow then plus im very curious if its going to start tomorrow

 

Ok good

 

It will....

 

Will take a look at that when i get home tomorrow thank you very much for your help so far i appreciate it

 

Ok I’m going to be home soon so what am I checking / testing we left off on the afr sensor and the canister so I’m assuming you want me to prong the afr sensor and the canister or is it a different test

 

For the Test in post #70 above.
You will unplug the AF Sensor, and test the connector going to the Sensor. NOT the ECM side.

In this test, you are testing the A/F Sensor.

 

Ok so if I’m reading dm93 diagram correctly I’m testing for power in pen 2,3 and ground in 1,4

 

No we're checking the resistance of the heater circuit in the sensor, set your meter to ohms.

 

Ok got home looking for the Multimeter went ahead an checked this morning before i left for work she did start but when i got home she did not start

 

She did start agin, i found my meter so im checking this plug in drivers

 

Hope i did that right

 

You need to test this end.

 

Hopefully thats right