1st Gen Lunchtable Thread - General Discussion

https://www.aceraceparts.com/collections/flex-couplings-and-flex-bellows

 

Don't come over if this is you

 

I just replaced my other TiCon one in the current exhaust... I bought Vibrant this time around. I think they were required to flex a little too much in the current exhaust, just the static alignment of pipes I did was terrible.

 

I orginially used these from Ace-Race

I bought these to use this time around: but they neck down more than expected ~2.5->2" so I bought the TiCon on Amazon lol

 

No lie, some pizza rolls sound good right about now

Haven't had any in yeeeeears

 

Just put the kiddo down for a nap and got a round in.

https://youtu.be/M_CuRhNkak8?si=SpsI1LOs8dXMyGbH

Similar to last week in that anyone sniping is slow as hell, and the only real troopers are those rushing as needed (in squads).

Running medic with a squad is both rewarding and very efficient for Rush/King of the Hill/etc.

 

Current thinking is I may have a contaminated or mislabeled bottle of argon, I had only been making quick tacks with the bottle while laying out my exhaust, threw a quick been on mild last night and it was sparking!! and no amount of post flow would prevent my tungsten from oxidizing... called a local shop I know who uses the same supplier and asked him to drop a bead on aluminum and he has the same birdshit and a bottle with a similar fill date.

 

Interesting. Guy I was helping last winter his co2 for his old mig machine was freezing up constantly. Finally called the supplier they asked if the bottle had a red mark on it. It did. Guess those are drop tube bottles used for extracting liquid co2.

For some reason until this I thought gas companies didn’t screw up.