What Have You Done To Your 4th Gen Today?

what is your roof rack setup? that looks great

 

I am interested on what roof rack you are using to get under your RTT. Do you have closer up pictures? Thanks.

 

first fill up of gas today AM

since purchase 2 weeks ago
-dash cam
-ceramic tints all around
-wanted some yellow fogs but didnt wanna opt for the fancy rigid ones, so i bought some cheapo vinyl overlays on ebay for $7 and stuck them on

 

Just some simple mods today! 12Vpower in the bed, LED light for the cubby, and of couple of magnets to keep the gas door closed in the car wash!

 

thats pretty dope, any write up or links on how to add 12v to the bed?

 

I second that request!

 

They can be found for less than $160. I paid ~$130 for the OEM ones online.

 

Had custom pillows made for my kids that frequently fall asleep in the back because the ride is so smooth.

 

Today, my naked truck came out of the garden of Eden and was finally clothed with a Weathertech tonneau cover. It is so much nicer than my 3rd gen factory tonneau cover. The rubber seems on the old cover rotted out after just a few years. This hot Florida sun did a number on them. Although I have had my new truck for 2 weeks now I just sold my old truck yesterday. After having 5 offers on it I finally received an acceptable offer that I took. After buying my old truck new almost 9.5 years ago it was a little difficult saying good by to it but I really like this hybrid truck.

 

I have been told here you can't have anybody in the back. Link to the shop? Thanks.

 

My kids fall asleep in the back all the time because this truck is so smooth.

I had this seller custom make them.. there's a little bit of a language barrier so I had to Photoshop some mockup photos of how I wanted it.

I also had someone help me create a vector of the logo so I could send it to them..

https://www.etsy.com/listing/4337642980/personalized-car-pillow-set-3-piece-neck

 

I used this outlet off Amazon

Limited-time deal: Nilight QC 3.0 USB Charger and Cigarette Lighter Socket Pre-Wired 12V-24V for Cars Trucks

$14 Nilight QC 3.0 USB Charger and Cigarette Lighter Socket Pre-Wired 12V-24V for Cars Trucks

https://www.amazon.com/dp/B0CD7TRVY2

Then you’re going to need about 25’ of red and black 10 gauge wire, a fuse holder, and about 20’ of that split plastic loom. I went directly off the battery and it was easy to run the wire to the back of the truck. I just zip tied it to existing wires and it blends right in!

I used the front panel as a template to mark where to drill. I chose my spot poorly! Before you drill any holes in the bed get underneath the truck and look up from behind the mud flap. There are re-enforcing ribs molded into the bed. My first hole was a direct hit on one of them. If I had moved it an inch forward or back I would have missed it. Not a big problem, but it just made extra work!

FYI I soldered all the connections and shrink tube over everything.

Hope this helps

 

I need a pillow that says “2TR-FE I AM FLOORING IT!”

 

Added some stickers today. Yellow one didn’t cooperate but someone would have to look really closely to notice - which I’m sure several of y’all will zoom in!