AZ Classifieds

I’ve already got a bunch of shit on my truck off of yours so it would be fitting

 

Got a rear suspension package from Archive garage.

Leaf springs are the medum load 200-700 lb. They dont even have 10,000 miles on them and have never been overloaded. Also have new uninstalled plastic sliders that go between the leafs. $ Sold.

Hammer hangers with stock Shackles that have Poly Bushings installed. Also have a set of 4.3" fabbed Shackles that will go with them. They can be used to lower the rear about 3/8" if needed.
Hammer Hanger cross tube. Ties the frame to the hangers. $ Sold

Ubolt flip with option 3 bump stops. These are great and provide a nice progressive engagement. $ Sold


I had this setup coupled with a shock relocation that had 12" stoke shocks. Will easily pull almost 14" of travel with 14" shocks. This was a great preforming package. Even with the bed unloaded it didn't ride bad at all.

 

Interested in the leafs if you do end up parting out!!

 

Id be interested in hammer hangers in part out event.

 

PM sent

PM sent

 

Hammer Hanger Cross Brace for sale.

I bought the hanger kit shown above but wont be using the brace.

If you have HH or are looking to get some and save a little $ here is your chance. This is a $240 option, I will let this one go for $100.

In good condition.

Located in Tempe/Mesa area.

 

WeBoost for sale.
Box was opened to check everything and to see where I would possibly mount it but otherwise unused.
Asking $400
Located in Chandler

 

Hey guys,
Does anyone have a set of low hours Yellow Diode Dynamics SS3 in the Sports and or Sport Power and wanting to move to the Pros and or Pro Power lights?
If so please PM / DM me because I have the Pro / Pros with less than an hour on them and I was thinking about going to the Sport lights. Why? Because I think the Pros have to much spillover.
So I was thinking about doing a swap and if you could add some cash for more power that would be great!
I have the sockets to exchange the lenses because I have yellow driving lenses.

 

Bump

 

free bump. @azshooter40 takes good care of his stuff.

 

Good luck with the swap - the sports will have a better defined cut off for sure.

 

WTB compound bow.. is there anything out there? If you have something please PM me. Hoyt Or Mathews preferred, but open to all

 

1st gen Taco DIY Long Travel kit.
Unknown origin. Needs finishing.
Has Abs ports.
Hubs seized
SOLD

5vz-fe V6 valve covers. No broken ears. Needs new powder coat.
SOLD

 

Unknown origin... But like where did you find it, cause I think I recognize the kit

 

@Speedytech7
I acquired it from a customer who had this then went to Sas on his rig.

 

My dumbass wants to try and run it

 

Haha well someone local has called dibs. If he bails maybe I can ship you 100lbs of steel.

 

95-00? Tacoma hood. Off my 1996. In good physical condition.
SOLD

 

Is that just white with plastidip?

Keep the 1st gen stuff rollin, we only ever get 2nd/3rd in here

 

I think its paint.