The Florida Classifieds

All SOLD F/S 4 km3 255/85 R16 tires and 4 TRD rims 16x7.5 15mm offset, tires have lots of life left, no plugs, no patches. Came off my 99 Tacoma, not a package deal, either all 4 rim or all 4 tires or both make me an offer
Rims are sold
ALL SOLD

 

WTB 2nd/3rd gen predator steps in the Tampa area.

 

How many miles? Pics of the ball joints?

 

ISO used hammer hangers. Thx.

 

ISO 2016 - 2023 differential with 4:30 and T8.75 Elocker.

 

BUMP. SCS Wheels still available.

 

Tacoma Fox 2.5 with adjuster shocks, the springs are 14in 600s. Icon rear leaf springs, dirt king uca, custom powder coated, all in great shape with no leaks, Asking 3000

 

Summit Dakars with Yokohama geolander 285/70/17. Tires are in great shape with plenty of tread left. No plugs or patches and comes with TPMs sensors. 2500 obo

 

@hosemonkey How many miles on the set of shocks?

 

Didn’t buy them as a set so front is around 15k and rears are at like 10k.

 

$*FREE*$ marker lights. Rapter lights, whatever you want to call them. Seffner, FL pickup only.

 

Bump

 

Used BROG Attic
$60 shipped to the US50.

 

Anyone selling 3g leaf springs?

 

Bump

 

APL55 Dual Zone Fridge Freezer from Iceco
Asking $750. Sold the Tacoma and need the much smaller one now. Located on the GA/FL border.

 

.75" coil lifters. Make offer.

Strut Spacers

 

One 3/8" strut spacer. Kill the taco lean.

Trail grille toyota letters, grey.

Trail grille non TSS garnish.

Trail grille marker, rapter, LEDs, lights.

Make offer. One or all.

 

Just sold my 3rd gen truck that I had for around 9.5 years and 33 mods. I took off some of the mods before selling it and will now offer for sale here. The first offering will be the Volk Racing TE37 forged wheels in 17x8.5x-10. I wanted to put them on my new 4th gen truck but the new hybrids need 18inch wheels. These gunmetal wheels are in excellent condition with no dings, dents, or scratches. They are currently retailing for over $4200 and the best price I have seen is over $3800. I am asking only $2900.


SOLD-The next item is the OEM Audio Plus plug and play stereo system. It includes the 6 speakers and sub along with the combined amp and DSP. The wiring harness also is included. This system is currently being sold for $2699. It is a very easy install with a great youtube video. I am asking $500. SOLD


The next item is the TRD Performance intake. It does not include the intake flow accelerator but does include the washable air filter. I am asking $200.



Next we have the Artec LCA skid plates. They retail for $299 and I would like to get $125.



Now we come to a unique item which is the JFR equal length y-pipe. He built a lot of them for the 2nd gen trucks but I drove over 1200 miles to his shop to have a custom made set for my truck. There are many benefits to having an equal length y-pipe and I summarized them in the following post. Check posts 1623 and 1628. I am asking $1200 for this unique piece of jewelry.

https://www.tacomaworld.com/threads...2nd-gen-tacoma-t4r-fj-cruisers.578228/page-82



I have some other items which I will post later today or tomorrow but this post is likely too long as it is. Sorry for posting pictures of the wheels twice but I could not figure out how to remove just one set of pictures.

 

Now to continue my post from yesterday is a small item. I added TRD Pro led fog lights to my previous truck and kept the original fogs. I wanted to replace them with the original fogs but could not find the plastic trim piece so I had to sell the truck with the Pros on it. These are original fogs that I am asking $20 for.



SOLD-The next item is the Roadmaster Active Suspension for the rear leaf springs. They improve stability and roadhandling and make towing easier. They also can act as a rear sway bar and traction bar which will prevent axle wrap. They can be set from 0 to 1 inch of lift in the rear. I chose 1 inch because I had also added the TRD Pro front coilovers which gave almost an inch of lift up front. They are currently just over $500 and I am asking $200. SOLD


The next 3 things are brand new which I never installed. First up is the Vibrant Performance ultra quiet resonator in the 2.5 inch size. They are $135 new and I am asking $50 for my new one.



Next up are the URD power extractors. These are ceramic coated inside and outside for heat control. They connect the exhaust manifold to the y-pipe. Even though each head has 3 cylinders they only have one exhaust port which is a major restriction for these engines as you will see in my next offering. I am asking $200.



The following is something that I had great plans for and spent a lot of time on but Covid happened and the Toyota master tech that was going to help me backed out. These are the 2 cylinder heads that have been ported and polished on the exhaust side where the major restriction is. I also installed oem titanium valves from the Lexus LC500 which are a perfect fit for our engines thanks to the Toyota TNGA standardization. They are just as strong as steel and only weigh about half as much. With a tune they allow the engine to safely go up to close to 8000 RPM red lines because the lighter valves will not experience valve float and flutter that the heavier valves will. I will also include the Toyota oem seals and gaskets kit. I have almost $3000 in everything not including my 25-30 hours of personal labor. The 2nd picture below shows the before the porting and polishing while the 1st picture shows the after the porting and polishing. The next picture shows the original box with the seals and gaskets. Finally, the picture below it shows the receipt for the titanium valves which were bought from Longo Lexus. All of these prices have increased since I bought them. Sorry, but they came out of order.






For the last item I am selling the belly pan which reduced the aerodynamic drag under the truck and improved the mileage by 1.25 MPG. I have done a couple of write ups on Tacomaworld for this item as well as all of the other things I am selling. This is the V.2 version as the original version was too bulky. I have around $500 in it and am asking $200.