1st Gen Lunchtable Thread - General Discussion

I’ll try to remember to post it here if I see it!

 

Thanks!

 

Anyone try replacing there grill/ headlights with Amazon..ebay...parts/kits anygood or ..ehhh....

 

Most cheap headlight housing have poor light output I found. Like it scatters the light and looks uneven or dim

 

bwhahaha holy blue...

 

you blue it kid

 

I haven't had this piece/cover since I bought the truck. lol.

 

you definitely have it now lol

 

Going a kettle bit crazy this morning... finally trying to put my sequoia axle together, but need to replace a stud on the pinion(companion?) flange... they seem to be m12x1.0 which i cannot find anywheres.
Anyone have an idea?
@Speedytech7
@Empty_Lord

 

It’s a funky size. The only place I’ve been able to get them is toyota

 

My pinion flange just has the regular M11 holes no studs.

 

I have the damper flange, not sure if it's special/different but hopefully it keeps 3rd gear alive longer...

 

and the shouldered flange bolts are available from TG and probably others…

i have had some coarse thread metric bolts holding that all together on the tcase side for 6 years so idk that it really matters as long as they’re graded correctly and torqued sufficiently

 

yeah the current setup on the truck has a mix of oem and 10.9 hardware on it... this flange seems my kinda special tho

 

I would personally just rip that off and put on a regular multi drilled flange, that thing is literally just there for NVH on the 2wd version of that big ugly SUV

 

I know what its there for lol, and have elected to keep it

 

Aight then, good luck stud hunting

 

im lazy,

i would retap to m12 and use off the shelf hardware

 

Are the holes in his driveshaft flange even the same spacing and large enough... it's a weird specialty piece and IMO pointless to keep on hand waiting until it fucks you out of reach of obscure parts.

 

well, on the diff side there looks to be enough meat to drill it to whatever pattern is required to match what the drive shaft side of the flange is

whether its worth doing is debatable and i agree on the latter