1st Gen Lunchtable Thread - General Discussion

maybe throw sone castors on one of those old school really HD metal file cabinets? i have 3 in the shop full of bolts and shit lol

 

Ooooh I didn't even consider those at all.

Those drawers are always huge.

 

@Wulf

Great idea, something like this is perfect

 

Usually basketball shorts, until it cools off some

Hobo Freight saves the day again!!

 

It's worth trying for only $7 lol might get wrecked on the first hole though as they're plasma cut so the metal is hardened

 

I picked up a few at the last 30% under $20 sale (which is supposed to be happening again weekend after next). Not using them on anything particularly thick or plasma cut to your point, but good enough for the price!

 

I just hope it'll last through a handful of holes, at least the entirety of the top I cut out (the 10" x 10").

 

Wow this thing is sexy

 

@Ozark_RegCab

Get one of these too, chances are yours tore apart when the bellhousing failed

More Information for WESTAR EM9115

 

This is next level shaming

https://www.instagram.com/reel/DOWpndKjajh/?igsh=NTc4MTIwNjQ2YQ==

 

Stock power and non offroad use I’ll always recommend the stock Aisin clutch.


Anything else I really like my LCE (aka south bend) dual comp

 

South Bend has really gone downhill lately, I hope LCE isn't feeling that pain too now. We have been getting custom clutches from Clutch Specialties in GA, I just call up the dudes and tell em what I'm doing, what power I'm making, and the feel I typically like and he always cooks up something that's impressed me. And best of all, the prices are like travelling back in time to 2015.

 

Also can't get the fucker anymore and the OE one on rock auto is overpriced and uses plastic spring retainers.

 

woot, found a place out in BFE that has an elocker for my new rear axle for a whopping $135. he already pulled it last week for someone else but I guess the guy who was supposed to buy it never called

 

Clutch Specialties huh

I will have to try and remember that. he builds them?

 

I wonder if there would be much of a market for a manual hub gear that accepts an ADD spindle. could be a fun project to lose time and money on lol

 

Yup, he does each one to your spec. Real good dude, he always under rates them too, we had one rated for 500ft lb that held over 650 with no slip at all. He can do all organics, ceramics, or half and half even.

 

@Wulf

Which one are you

 

depends on the day and the project lol. shitbox diffs? the last one
oil pan? first one

 

New boss just dropped, I’ve been friends with her for 15 years! I was really worried about starting over with someone so this is awesome! LFG!!