1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

spark plug wire replacement problem..HELP!

Discussion in 'Technical Chat' started by Chillyone, Apr 30, 2011.

  1. Apr 30, 2011 at 8:52 AM
    #1
    Chillyone

    Chillyone [OP] Member

    Joined:
    Apr 30, 2011
    Member:
    #55826
    Messages:
    13
    Gender:
    Male
    Vehicle:
    1996 Tacoma 4 x 4
    Just changed my plug wires on a '96 3.4 liter 5VZ and fired her back up, a bit rough starting and runs rough. Didn't run it much and did not drive it under load. I MIGHT have wired wrong as I was interrupted and had to come back to the job, and want to know which wires go to which cylinders.

    Any drawings or a format to which goes to which would be GREATLY appreciated.

    Thank you very much!

    Chillyone :D
     
  2. Apr 30, 2011 at 8:56 AM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,518
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Welcome to TW!

    Is this what youre looking for?

    [​IMG]
     
  3. Apr 30, 2011 at 9:14 AM
    #3
    Chillyone

    Chillyone [OP] Member

    Joined:
    Apr 30, 2011
    Member:
    #55826
    Messages:
    13
    Gender:
    Male
    Vehicle:
    1996 Tacoma 4 x 4
    Thanks Chris! this is the firing order for 1996 3.4 5VZ. correct?

    Muchly appreciated my friend!!!!!

    Chillyone :)
     
  4. Apr 30, 2011 at 10:09 AM
    #4
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,518
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Correct. And that also shows what wires go to what cylinders from teh coil packs.
     
  5. Apr 30, 2011 at 10:10 AM
    #5
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,518
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    You may also want to check to make sure you didnt disconnect any vacuum lines on accident.
     
  6. Apr 30, 2011 at 11:26 AM
    #6
    Chillyone

    Chillyone [OP] Member

    Joined:
    Apr 30, 2011
    Member:
    #55826
    Messages:
    13
    Gender:
    Male
    Vehicle:
    1996 Tacoma 4 x 4
    Chris 4 x 4,

    A JUMBO "thank you" for your help..."got 'er done!" your diagram was all I needed....
    Cheers, I'm buying the suds!

    From Oregon....

    Chillyone :)
     
  7. Apr 30, 2011 at 2:14 PM
    #7
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,518
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Glad to help! :)
     

Products Discussed in

To Top