Can someone tell me a bit about this suspension setup from pix?

Sorry for crappy pix, but I'm looking to buy a truck and wanted to know if anyone can tell me more about the susupension setup. It's from a dealer so they don't know what the original owner did.

Any info would help...thanks.

 

Looks like 1.5 or 2 inch blocks in the back. Which suck, but easy to fix. And maybe OME setup in the front. Not sure on the front though.

 

Looks like OME front struts and out back a 2" leveling block.

 

deff OME

 

Its hard to tell from the pics.

 

agreed

 

Do you have a photo of the top of the front strut? That will show if there's a spacer up there or if the coil is providing the lift.

 

That's all the pix I have now, but I'll ask for more. Does that look like a 3" lift? Does anything look cut or perm modified on it that I can't fix easily? Thanks.

 

That is 3 inches or less. The OME springs are rated for 2.75" all by themselves..and usually come up at or less than that height. You can remove and replace anything you'd like (like removing those rear blocks and installing an AAL or new leaf pack.)

 

IMHO looks like the coilovers here,

http://www.tacomaworld.com/forum/1s...e-881s-n91s-shocks-assembled.html#post3077535

 

These are for a first gen, same manufacturer though.