Link for an 01 cluster lighting change.

I have looked and looked. Cant find a LED light swap for an 01. Anyone point me in the right direction?

 

In the back of the cluster you have 4 t10/168 bulbs. For the Tach and speedo. Only down side to the 01-04 is no matter what bulb you put in there you will have an orange tint to them because theres an orange film on the gauge face. search ebay for a new gauge face and swap it in.

 

How bad of an idea is it for someone that has 0 soldering experience to attempt this mod?

 

You have an 01, I'm pretty sure it's like mine. Just remove the bulb holders and plug a new bulb in.

 

So it doesnt even involve soldering? I was looking at a link to a 2nd gen lighting change and they were using a soldering iron for something. I was hoping i didnt have to get into this. What lights did you use? I need to go ahead and make an order.

 

http://www.customtacos.com/tech/index.php?article=77

and

http://www.customtacos.com/tech/index.php?article=110

www.superbrightleds.com

 

I used t10 5 SMD bulbs. You will need 4 of them. But on the 01-04 why ever bulb you put in you will still have an orange tint. Because of the film they put on the cluster

 

There is no film in the cluster, only on the a/c controls

 

Are the bulbs for the cluster the same as the ones for the AC control? Might as well do it all while im at it.

 

The ac ones are t5 I think

 

Can someone please send the actual link of the bulbs i need to order. I, being the dumb person i am, seems to be having trouble finding what i need. I am wanting the blue. Any help would be greatly appriciated. I would hate to order the wrong lights. Thanks in advance.

 

The t10 should look like this. 5 LEDs on the bulb.
http://www.amazon.com/gp/aw/d/B001BP6OF8/ref=redir_mdp_mobile/189-3337863-1995451

You need 4 for the dash

The Parking brake lights, turn signal, ect, od lights are different bulbs. I just left those stock

 

Awesome man! Greatly appreciate it!

 

I saw these before but didnt think that those were right. I figured the ones i needed fit flush to the board. What i get for assuming huh?
Also will any 194 bulb replace these?

 

Yes any 194 bulb works your ac panel can't be changed due to the film on the back of the bezel plus they lights in there are a pain in the ass

 

Good deal. Im ordering them now and will post pics when its all finished up.

 

i posted that link for superbrightleds.com id check them out too cause they have fair prices and a wide selection of led styles at colors

 

I couldnt find the T10 with 5 SMD's on there.

 

you need 194 wedge base bulbs

 

http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fmini-wedge.html

there look at the T3-1/4 (#194/168) bulbs and get the WLEDx5 bulb thats what i have and they work perfectly. the wide angle ensures you have no dark spots and i havent noticed any with mine