Camburg Lift Spindles:Largest tire

Hey TW,
I am getting the Camburg lift spindles in a few weeks and wondering what is the largest tire I can fit with this lift?
I'm running 285/50/20 now, but I'm getting a extremely good deal for set 305/50/20 Toyo Open Country's.

So I guess my ?'s are 1) Will they fit
2) If Maybe, how much trimming.
3) What are people running in the rear with the Camburgs upfront?

 

Bump..

 

I'm curious too.. Is there anything else done to your suspension right now?

 

on their site they used to recommend 285/75/16, now they just say that they need a "maximum wheel backspacing of 4.5"

my manager runs the camburgs with 315/75/16's so you should be good with just about anything..he has 6.5" of lift up front

 

So I guess my ?'s are
1) Will they fit Yes, but prepared to start chopping

2) If Maybe, how much trimming. Maybe is not a ? You might need an extra lift out of your coils. So Camburg Spindle + 1inch from your Coils. Then the Cab Mount Chopped. You might look into also trimming the pinch well. Inner Fender Flare Trimming and Front Bumper Trimming. Then depends on the offset of your rims too. IT sound like a lot but it really isn't.


3) What are people running in the rear with the Camburgs upfront? Your rear will need at least a 3inch All Pro lift. You will hit the fender flares when your fully stuffed. So remember that.

 

^^^^^ I recently got spindles and I have my cab mount chopped, the inner fender well, and outside flare cut back...I'm only running 285's but there looks to be plenty of clearance for 305's

 

Yes, but remember, when you turn at full cock or reverse. Thats when you notice the larger tires. Offset backspacing of rims play a part also

 

My rims have 4.5 back spacing. At full lock there is still plenty of room. But the cab chop is definitely needed

 

plenty of room when your not flexed out...right? are you just talking about parking lot manuevers with the wheel locked or are you saying when the wheels stuffed in the well?

 

Silly question to the OP:

Why did you get spindles if you planned on putting those beefy big ass wheels on?

 

i run 305/65/17 barely any trimming not even cab mount on the tire size calculator it says mine are bigger than yours will be. also i am running the tsb leaf pack with and added AAL so almost 3 inches in the rear.

 

I realize its his truck and i have never seen it so I am curious as to how he came across spindles as his choice for a lift for what he is looking to accomplish. A simple question, nothing demeaning or derogatory just a simple question because I felt like asking.

 

I asked a question addressed to the OP curious about his reason. Are you the OP?